24V DIRECT SPARK IGNITION MODULE
The 65443 24V Direct Spark Ignition Module features a high-state of copper beryllium resistance for increased voltage transfer efficiency. Aluminum oxide dielectric insulator, ten-foot power wires with ring lugs. This ignition module works well with the Robertshaw 14699,14743,14744 and 5970 24V AC Unsaturated Magnet Control relays.
The 65443 Direct Spark Ignition Module can replace urther spark ignitron modules when those are malfunctioning. They are also used to convert units from older direct spark systems to newer electronic ignition systems.
Do you have a carbide tipped grout saw that will not run any more? are you tired of replacing the coils every time the saw quits running? do you look at a new saw every time you want to use it? if you answered yes to any of these questions then consider a direct spark ignition module for your carbide grout saw. By eliminating the spark plug and installing the Direct Spark Ignition Module, you will be able to repair your saw for a fraction of what a new
The 4-pin, 24V/40A direct spark module is designed to work with most of the generator controllers used for natural gas engine powered generators.
Small Engine Ignition - 24V - Single Spark Module
The 24VDC Ignition Module harnesses the power of two, 24 V batteries to provide twice the spark energy for easy starts. When your engine is running, this module can be used to fire off Miller-compatible tools with a single pull of the trigger (tools are not included).
Replaces Engine N/O Coil To Allow Direct Ignition Wiring The module is programmed and tested to specifically replace the original module in the L2520 (6 cylinder gas engines) Locomotives. Manufacturer: ROBERTSHAW