HOT SURFACE IGNITION MODULE HS780-3
The HS780-3 is a Hot Surface Ignition Module for the HS770A
A range or restaurant exhaust hood system is a critical and necessary component of your business. You need to ensure that kitchen-related smoke and grease are extracted from the building in a timely manner. The HS780-3 is a Hot Surface Ignition Module that will help you do that by monitoring the 900 square foot space for the presence of fire. Once it's detected, it will automatically ignite the burner system, pulling smoke and fumes from your business quickly and effectively.
Our HS780-3 Hot Surface Ignition Module is a direct replacement for the original unit on selected models of Thermomix cookers. It is designed to be used with a valve of type 6 sec.
The HS780-3 is a Hot Surface ignition module for gas valves with 6 seconds countdown time. It comes with 2 local sensors, 1/4" male thread connection and requires the use of a control panel.
THE ROBERTSHAW HS7803 HOT SURFACE IGNITION MODULE IS A SCANNABLE, MODULAR, PORTABLE OPTION FOR INSTALLING COMMERCIAL POINT OF SALE APPLIANCES. A TIME DELAY GAS VALVE MAINTAINS THE VAPOR LOCK PROTECTION OF THE MODULE WHILE HELPFUL HARMONICS ARE TRANSMITTED TO THE DISPOSABLE PROTECTER HOT SURFACE IGNITION MODULE.
The HS780-3 System Module has been designed to meet the new Underwriters Laboratories (UL) 404/D 8 and UL 924 requirements as a secondary detection component for a fire sprinkler system in buildings containing Group A, B, C occupancies. This module is activated by heat from a fire and is used in place of a water flow switch. The HS780-3 module may be used on any brand UL approved commercial or residential sprinkler system where it is desired to provide for silent automatic alarm operation and or, remote signal actuation. It may also be used on other systems such as fire suppression, vapor
The HS780 series igniter provides an alternative to the MCM-xx control panels. The inclusion of a local sensor into the igniter design allows quick and easy installation. With just a simple jumper the igniter will interface with a three or six second valve.