WHITE-RODGERS 14397 Emerson Class 2 Transformers Energy Limiting, Universal Mounting, 24V

40VA, 60 Hz, 120V pri., 24V sec., m

The Emerson Universal Mounting Class 2 Transformer is a 40VA/60Hz, 120V primary, 24V secondary UL listed transformer. It is designed for use with the EMR135F and EMH135F Regulated Lead Acid Backup Power Products.

The Emerson Universal Mounting Console is a 120VAC, 60Hz, 40VA, hardwired control transformer with 24VAC output for energy limiting Class 2 power supply applications. It can be mounted horizontally or vertically. It has universal mounting tabs and screws included.

This transformer is a Class 2 power supply designed to meet the energy limiting needs of residential load centers of up to 3500VA. The unit uses precision thin film resistors in conjunction with a microprocessor controlled triac phase angle controller for operation on 208-240V nominal, single phase. The transformer is double insulated for protection against short circuit and power surge, and incorporates an optional 40 VA step-down secondary winding that can be used for four wire delta motor control. This transformer meets UL60950, CSA22.2 No.105.10 and C22.2 No. 105.0-04 standards (

The WHITE-RODGERS 14397 Emerson Class 2 Energy Limiting Transformer is used to reduce the voltage from 120V to 24V for mechanical pushbutton, indicator, and pilot lights in electrical control panels.

The Emerson Class 2 Style Transformer is designed for converting line voltage (120V) to the reduced secondary output voltage (24V) for applications of 24 volt DC. The transformer may be mounted either vertically or horizontally. It has Tappings for both 120V & 240V, as well as a dampening resistor to limit the inrush current through the contacts of the relay.

If you have two separately derived 120V circuits that need to be combined for a total load, then combine them safely and effectively with the W-RC2. Its universal mounting bracket and adjustable cover plates permit easy installation on standard 18" centers; no tools are required. You can select the transformer speed ratio from any one of 10 available settings. The knob on the front adjusts the ratio setting. It is provided with an overload relay to protect the connected equipment.

Class 2 transformer, indoor only, two pole 120/240V, 3 wire with ground, 4000 VA rating with NEMA 1 enclosure.