Johnson Controls 7287 A70 Series Two-Circuit Temperature Control, Four-Wire, 15-55 Degree F Temperature Range, 20' Cap

TWO CIRCUIT TEMPERATURE CONTROLP 15

THE 7287 A70 SERIES TWO-CIRCUIT TEMPERATURE CONTROL IS A ONE POLE, TWO-TERMINAL CONTROLLER FOR USE ON ELECTRIC HEATING EQUIPMENT. THE CONTROLLER PROVIDES CENTRALIZED AUTOMATIC TEMPERATURE CONTROL OF THE HEATING SYSTEM FROM A SINGLE OPERATOR SITUATION. CIRCUIT TERMINALS ARE LOADED WITH STANDARD 20 AMP, 240 VOLT THERMOCOUPLE TERMINALS AND CONNECTED TO A TWO WIRE CABLE THAT

Two-circuit temperature control with return and the "R" terminal for series operation. Controls up to 100 horsepower.

A temperature control for a heating/cooling system having a sensor in the area to be controlled and two separate output circuits to the supplemental heating/cooling means and supplemental cooling means. In one example, a furnace includes a main air duct for conveying air from the furnace to the area to be heated or cooled, a secondary air duct that carries air from an air conditioning unit into the main air duct, and a two-circuit temperature control for adjusting the volume of air flowing through the main duct. The control includes sensing means for sensing the temperature in the area to be heated or cooled, motorized valve means for

Our two-circuit temperature control allows you to run a side by side setup or to add extra safety so one circuit can provide cooling for a portable unit. With a temperature range of 15 degrees F to 55 degrees F, this thermostat is ideal for powering hydronic heated floors in residential applications.

The 7287A70 Series provides nighttime cooling or control of an auxiliary heating source. This two-circuit, four-wire temperature control has a range of 15 to 55degrees F and is suitable for 600 volt heating systems. The bottom wire allows for reversing polarity. The heat anticipator protects the element from damage due to electrical transients. A 70 Series temperature control can be used to regulate temperature in a variety of applications, including temperature maintenance during engine starting, air conditioning, refrigeration systems, furnaces, boilers, refrigerators, hot water baseboard heating systems, space heaters, warm air furnace

The A70 Series two-circuit controls are designed to provide accurate, economical temperature control for all types of heating or cooling systems. The A70 Series can operate air conditioning equipment in cold climates with ambient temperatures as low as -15° F.

Forty cubic foot electric heaters add heat to a room in need. An external two-circuit temperature control unit with four-wire leads has settings for "Heat," "Cool," "Off," and "Fan On" in a 15 degree to 55 degree F temperature range.

Three-wire temperature control

A70, Flame failure device, 20' cord, 120 VAC / 20 amps, 24.5 watts, 208-230VAC / 13 amps, 60 watts, adjustable minimum airflow trigger

Maximizes operator control and saves energy $ $ $ $

Thermostats provide temperature control for heat-strip heaters, electric baseboard heaters, and fan-forced heaters.

Regulates the coolant temperature of an air-conditioning or heat pump system to minimize energy consumption. Suitable for use with gas, oil, and electric heating systems. Available for four, six, and eight wire applications.