Johnson Controls 7291 TWO POLE TEMP CONTROL -30/30F DIFF 4-2

-30/30F; DIFF 4 TO 25F ADJ; 6' CAP;

The Johnson Controls 7291 TWO POLE TEMP CONTROL -30/30F DIFF 4-2 is the ideal small part heater. Designed for positive temperature control in heating applications. This product is intended for use on parts where uniform heating is required. It has an adjustable operating range of 50°F to 150°F. The line voltage control options allows you to use this product at voltages ranging from 115VAC to 250VAC. This part heater has four terminal connections basic combinations are straight cord/straight cord, straight cord/reversed cord, reverse cord/straight cord, and reverse cord/re

The Johnson Controls 7291 TWO POLE TEMP CONTROL -30/30F DIFF 4-2 allows to quickly and easily control the temperature of a room, barn, garage, shop, or any other small space. The two pole allows for multiple units to be connected together to control a larger area.

The 7291 Series is a direct controlled unit with a 4-way termination to provide -30/-30F nominal temperatures, high limit protection, low limit shut off, under voltage sense and lockout. It also provides gas & electric heat sensing, low voltage or common energized/de-energized terminals for secure equipment control.

The 7291 two pole temperature control is used to manually make temporary adjustments to the chilled water supply and return conductors at a given point. The 4 to 25 degF (ambient) adjustable temperature range permits the control to function as an on/off or proportional device, as directed by the operating instruction. The control may be installed in either of two positions; vertically or horizontally.

Adjust your room's temperature with this Johnson Controls 7291 TWO POLE TEMP CONTROL, sized to fit single-ganged, double-ganged or multi-gang receptacles. With a uniform finish, you'll never have to worry about discoloration or peeling. Its compact design ensures that it won't take up space on your wall, taking just 11/16" of space, yet providing 4 to 25 degrees of temperature control. This Johnson Controls 7291 TWO POLE TEMP CONTROL comes with child-safe weather resistant plates and may be used for heating or cooling operations.

Numetal Hy-Tec 2-pole temperature accessories are for use with controls utilizing the 7 or 9 temperature setting PID function. The accessory, when installed, allows each temperature setting to be fine tuned to allow for the control of process temperatures in ranges from -30°F to +30°F.

This item is a brand new from the factory.

A matching Thermostat and Temp Control Switch designed for use with radiators and baseboard electric heaters. Features include: Manual setting of desired room temperature, Two-pole: control powers both heating and cooling elements cold line energized below set point, On/off switch to control either heating or cooling separately, Enclosure rating: NEMA 12 Applications, Adjustable Auto-Changeover Switch, Connection: 1/2" Male Pipe Thread Output Auto-Changeover Switch, Connection: 1/2" Male Pipe Thread Input.

__Easily set the temperature inside your refrigerated trailer based on the ambient outside air temperature. A built in locking mechanism prevents operation when plugged into a live connection. Operates from a three wire, single phase power supply with a 4-2 terminal configuration. Includes a 7.5' Jumper Cable.

Our residential-grade Two Pole Temp Control provides year-round comfort by preventing rapid short cycling. Every unit discharges at lower levels throughout the off cycle, resulting in up to 80% energy savings. It reduces compressor motor start-ups and increases compressor life. By requiring less power to lower temperatures, this design may also provide reduced operating costs. This control meets or exceeds all applicable codes and standards for residential controls.

The Johnson Timer and Temperature Control (models 7291 and 7292)are designed for installation in air conditioning and heating systems to control the electric power, which is supplied by a 24 volt, 120 watt power transformer.