Johnson Controls 65854 Ptc Silicon Sensor with Pvc Cable, -40 to 212 Degree F Temperature Range, 6-1/2' Cable Length.

PTC SENSOR INCLUDES SENSOR AND 6.6'

Johnson Controls' PTC Sensor with 6.6' cable is designed to provide temperature protection where temperatures exceed the value set by the user. PTC uses a positively charged poly yarn to act as a resistor and produce heat. The sensing material begins as poly yarn, with a special coating on one side that allows current to pass through it intermittently. When a set trip temperature is reached, the yarn changes from an insulator to an electrically conductive element that shorts circuit the output terminals of the

The Johnson Controls 65854 PTC Silicon Sensor with PVC cable is a component of a wiring harness used to monitor the temperature in an electric or gas furnace blower. The sensor cable is 6.6' (2 meters) long, and the PTC sensor has an operating temperature range between -40 and 212 Degree F (-40 to 100 Degree C).

Add this PTC Sensor to your automated system to monitor when a door or container is left open for too long. This sensor can be used in applications such as freezer doors, warehouse doors, blast freezers and food temperatures. The PTC (positive temperature coefficient) sensor will sense even the slightest changes in temperature and will alert your automated system of any issues with the door or container. This small plug-and-play device is ready to install right out of the box, when power is applied to

Johnson Controls 65854, PTC Sensor With PVC Cable, -40 Degrees F to 212 Degrees F Temperature Range, 6-1/2' Cable Length. Sensors are used to measure the flow and level of liquids, gases or steam. These sensors can be used in process control applications as a part of a system such as temperature controllers for steam heating systems, water heaters, boilers, air conditioning units and manufacturing processes.

Johnson Controls 65854 PTC Silicon Sensor with PVC Cable, -40 to 212°F temperature range, 6-1/2' cable length

Johnson Controls 65854 PTC Silicon Sensor with PVC Cable, -40 to 212 Degree F Temperature Range, 6-1/2' Cable Length This sensor is used to measure temperature (resistivity) and generate alarm or output signal (which indicates shutdown of the system or container due to over temperature condition). 1/4" and 3/16" connectors are available.

The 65854 PTC Silicon Sensor with PVC Cable enables your choice of PTC or NTC thermistor type sensing elements when used with the 5300 series temperature display units or the 30R series Remote Ambient Temperature Sensors. The maximum operating temperature range for semiconductor type PTC thermistors is -40 to 212°F (-40 to 100°C) and the maximum operating temperature range for glass type NTC thermistor elements is -60 to 200°F (-50 to 95°