Johnson Controls 55727 PTC SILICON SENSOR WITH PVC CABLE LENGTH 9-3/4' -40/212F

PTC SILICON SENSOR WITH PVC CABLE L

PTC SILICON SENSOR WITH PVC CABLE LENGTH 9-3/4' -40/212F

PTC SILICON SENSOR WITH PVC CABLE LENGTH 9-3/4' -40/212F (55-727-01)

The 55727 PTC SILICON SENSOR WITH PVC CABLE LENGTH 9-3/4 offers reliable protection and trouble-free service. The accessory connector permits the sensor to be mounted on the cabinet door if desired. The input circuit provides a low voltage control circuit. This sensor can operate in any sensing mode: interrupting, momentary contact, or 2-stage depending upon the operation requirements of the application.

This PTC Silicon Sensor is ideal for monitoring temperatures of -40 to 212 degrees Fahrenheit. It has a cable length of 9-3/4' and comes with L14-20P plug. It has a voltage rating of 120 VAC and a current rating of 20 A. This PTC Silicone Sensor includes a 4 conductor wire and is UL listed and CSA certified.

#Product Description# Increase safety in your facility with this Johnson Controls pre-wired PTC heater monitor. Consisting of a silicone sensor and PVC cable, this item can be used with both 24 and 48 volt systems and measures 9-3/4' long. It is rated at 40/212F and will shut off heating elements if the temperature within any equipment exceeds that range. It is UL listed and CSA certified to meet the requirements of an EN954 compliant electrical installations. For maximum protection, it comes with a one year warranty set by the manufacturer.

Our Johnson Controls PTC Silicon Sensor is designed for use on gas, oil, and water heating boilers that operate on a control board. For safety reasons these sensors must be tested annually so check the date of manufacture on your sensor and replace it if necessary. This product complies with the requirements of ASHRAE 90.1-2010 so you can shop with confidence..

The EnduraSil 11 DFR sensor with a PVC cable has a sensing element composed of a thin film of Pt/Si alloy on an alumina substrate. This thin film from Johnson Controls is thin, flexible and lightweight - the sensor body only weighs 37.5 grams.

The 55727 is a Proportional Temperature Controller (PTC) with PVC cable. The PCB has two M3 threaded 4-pin terminal ports. The green LED is for overload indication.

The Johnson Controls 55727 PTC Sensor is used in Microwave Ovens, Electric Dryers and Water Heaters to sense when the load is out of the oven, or when the dryer has cooled down.

This replacement PTC sensor is compatible with the following boilers:

The Johnson Controls LS436MM-F80, Series LS436mm-F80, 277°F Ignition Coil is manufactured with premium quality materials including nickel-plated brass for long lasting durability. They're covered by a 5 year manufacturer's limited warranty for residential or commercial applications.

Keep your home at the perfect temperature--and save on your energy bill--with this easy-to-install programmable thermostat. Just give it a name and then use the simple touchscreen to adjust the temperature, fan mode, airflow or programmed settings for seven days a week.