Johnson Controls 8917 ENCAPSULATED PTC SILICON TEMP. SENSOR REPLACES SET

ENCAPSULATED PTC SILICON TEMP. SENSOR REPLACES SET

A Johnson Controls 8917 ENCAPSULATED PTC SILICON TEMP. SENSOR REPLACES SET is an electrical component found on some automobiles, consisting of an encapsulated integrated circuit that changes resistance with temperature. This sensor is designed to measure the temperature of the air charge or coolant flow.

Johnson Controls 8917 ENCAPSULATED PTC SILICON TEMP. SENSOR REPLACES SET is a plug-in, single-use replacement thermistor for use with the LUXEON Rebel LED driver family. The Johnson Controls 8917 ENCAPSULATED PTC SILICON TEMP. SENSOR REPLACES SET has a nominal resistance of 900 mW and can be used with both 25 V and 50 V LEDs.

Johnson Controls 8917 ENCAPSULATED PTC SILICON TEMP. SENSOR REPLACES SET sensors use an encapsulated silicon PTC element to sense and indicate a process parameter over a wide range of temperatures and other adverse conditions. The sensing element and attached lead wires are protected by a tough, glass-filled nylon case and molded standoffs that hold the element in position regardless of shock or vibration. This Johnson Controls sensor is designed to replace the set shown above

With this device you can easily replace the PTCs of Johnson Controls 8917 Modbus thermostat by yourself. Whether it is an emergency or planned replacement, our SILICON TEMP. SENSOR REPLACES SET will save your money.

Silicon temperature sensor replaces the set.

The Johnson Controls 8917 temperature sensor replaces the set temperature sensor and uses a thermistor housed within a cast aluminum PTC encapsulant to provide over temperature protection for the heating system.

Temp. sensors are commonly used to detect abnormal pressure, temperature and other applications in automation, scientific, process controls and infrastructure industries. PTC thermistors are often used in electronics, instrumentation, medical equipment and consumer devices.

PTC packaged thermistor sensor replacement for Johnson Controls 8917 Series thermostats. The 8917 PTC Thermistor is packaged with a 0.205"-6 cord compression, fabricated 1/8" NPT SAE 1/8" ID chromel-coated copper alloy connection, stainless steel 1/8" NPT back nut, and 10 feet of low temp hook-up wire.

The 8917 is a PTC temperature sensor for use in Johnson Controls, Bryant, Payne, Robertshaw, U.S. Motors and other compatible electronic ballast applications. The 91785-3 features a long life adjustable temperature range of 10 to 30ºC (50 to 86ºF) allowing for temperature compensation in electrical control systems while the 91786R features an adjustable temperature range of 15 to 30ºC (59 to 86ºF).

Reduces temperature range down to 0 degF (-18 degC) Our sensor is encapsulated in silicon with an extended temperature range of 32 degF (0 degC) to 392 degF (200 degC) and offers superior resistance to harsh environments. Our sensor also comes in two different part numbers according to the lead wire termination. If leads are cut, twisted, or connected with wire nuts, use Part Number 8917-1 for terminal or screw type wire termination; use Part Number 8917-2 for pigtail wiring termination. Our sensor is designed for quick replacement of the original faulty sensor assembly on

Johnson Controls 8917 Sensor replaces section 8915 This device acts like a thermistor, changes resistance in function of temperature. It is used to measure temper...

Why wait on stock! All orders are fulfilled by Johnson Controls. Get the exact part you need today!