AMANA CAP050800440RTP 80/5MFD 440v Dual Round Cap -Amana

80/5MFD 440v Dual Round Cap

AMANA CAP050800440RTP 80/5MFD 440v Dual Round Cap

The 80/5MFD, 440v Round Capacitor is designed with a drip-proof case and two or more electrical terminals to allow for attachment of large wire leads for use. This capacitor is used in the operation of air conditioners and other products requiring a filter capacitor.

The CAP050800440RTP is a 440 volt, 5 mfd capacitor that must carry the dual-round configuration and be used with an aluminum or copper alloy conductor. This capacitor can be mounted to a panel with its mounting brackets for easy installation.

Capacitor, AC Auto/Manual Reset, 440VAC, 5MFD +/- 5% @ 105° C, 60Hz, 250VDC Leakage Current 1500uA maximum at 6.3VDC Operating Temperature Range -40°C to +105°C, Case Material Polycarbonate Green Product # CAP050800440RTP Dimensions 4.7"L x 3.5"W x 2.7"H Case Technology Polycarbonate RoHS Compliant Yes

The Cap round capacitor is designed for use in single phase, 3-wire delta incoming voltage distribution systems, and is compatible with the following manufacturers: American Electric Power (AEP), American Power Conversion (APC), Blackhawk, Creston Electronics (CE), Cutler Hammer (CH), Eaton/Cutler Hammer (ECHD), Ginz family of Companies (Omega, Zodiac, Transtector, and others) Metrotech (Metra and others), Schneider Electric (Schneider and others), Square D and Westinghouse and other manufacturers.

This listing is for a New CAPACITOR -Amana Part #CAP050800440RTP. This Capacitor Is Fitted With Two EPR Terminals And Mounts In A Snap-In Terminal Box (Not Included).

This item is manufactured with high quality components that conform to international standards. If you are looking for top level performance from your product you have come to the right place. Put your trust in Amcor, an industry leader since 1926.

Conveniently fits both round and square porcelain fuse holders. Accepts fuses up to 5x20mm.

Designed for use in electric motors and other self-rotating applications, caps are used to fit onto the business end of a motor contactor or relay contact for the purpose of insulation. They are typically round in shape, with several holes for electrical contacts to pass through.

This cap is an electrical component used for providing electrical isolation. This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

The CAP(Capacitor) is an electrical energy storage device. The most common type of capacitor is an electrostatic unit made from a pair of conductive plates separated by a dielectric (insulating) material called a "dielectric." An applied voltage between these plates creates an electric field with built-in potential energy. After the voltage is removed, the stored energy remains in the charged capacitor as an electrostatic field.