Amana-Amana 0200054001P 150-45f LIMIT SWITCH 150-45f LIMIT SWITCH

150-45f LIMIT SWITCH

The 0200054001P Limit Switch is used on Amana Amana Refrigerators. The switch senses when the refrigerator compartment door is closed, and terminal 1 is closed when door is open.

The Limit Switch is a combination Three Pole Changeover, Normally Closed contact that will close the limit switch circuit when the operator is within 5/8 of travel to the limit switch. Opening the limit switch will not open the circuit. Features Automatic Overload Protection and Flame Proof Winding, Compact Design, Longer Life Span, UL Recognized and CSA Certified to UL944, CSA certified to C22.2 no. 94, UL Listed for use in Class I Division II Hazardous Locations, 3 Layers of Protection: Thermally Protected Blade With Ground Fault Circuit Interrupter (GFC

The Amana 0100054001P Limit Switch is a 2-pole limit switch with an adjustable limit, inrush current greater than or equal to 125A RMS and a voltage rating of 480/277VAC. This product can be used in commercial applications.

The Amana limit switch allows safe and proper operation of the HVAC equipment by sensing actual room temperature and switching the compressor or fan motors on and off automatically based on it. The limit switch also guards against overheating, keeping the temperature close to the set point.

The Limit Switch 0200054001P by Amana-Amana is a limit switch with a NEMA configuration of B, and NEMA size 0. It has a voltage rating of 208-230 VAC/60 Hz/1 ph, and is designed for use in locations that are dry, indoors, or in wet locations. This item can be used as part of a thermostat or temperature measurement system. The active contact of the limit switch is either normally open (NO) or normally closed (NC). This model includes circuitry to prevent nuisance trips due to repetitive actuation.

The Limit Switch can be used as a latch principle in any number of electrical devices.

The limit switch is designed to be used on heating & air conditioning equipment.