ASCO 8030G17 Power Technologies 1/2" x 7/16" Low Pressure Solenoid Valve, Normally Closed, Brass

"1/2""N/C0-13#

Neuco Inc ASCO 8030G17 Power Technologies 1/2"" x 7/16"" Low Pressure Solenoid Valve, Normally Closed, Brass

Solenoid valves are electromechanical valves with a coil that is energized and de-energized by an outside source. They have many uses, but are most commonly used in pneumatic systems to control the flow of pressurized air. Solenoid valves are primarily used as an on/off switch, but can also be designed to provide proportional flow control.

The ASCO 8030G17 Power Technologies 1/2" x 7/16" Low Pressure Solenoid Valve, Normally Closed, Brass is a great valve for any application where you need a normally closed solenoid. The valve's main purpose is to provide flow control in a wide variety of industrial applications. It works by allowing or restricting the flow of water or air based on an electrical control signal.

Solenoid valves are used in a wide variety of applications including, but not limited to, flow control, pressure regulation and on/off. Solenoid valves are electromechanical devices that use an electromagnetic coil to convert electrical energy into mechanical energy. The solenoid coil is energized by the application of voltage from an external power source. Once energized the solenoid valve is activated. When de-energized the solenoid coil releases its magnetic field which opens or closes the valve according to its position when actuated.

Solenoid Valve, Normally Closed, Brass Body, 1/2"" NPT Inlet Connection, 1/2"" NPT Outlet Connection, 3/8 NPT Air Connection. A solenoid valve is a part of most active safety systems. It can be actuated by an electrical current to open or close. The flow of a fluid through the valve is controlled by the coil current and the pressure differential across the valve.

This ASCO 8030G17 Power Technologies 1/2" x 7/16" Low Pressure Solenoid Valve, Normally Closed, Brass is a direct replacement for the OEM solenoid valve, and provides accurate and reliable performance. The valves consist of a bronze body with NPT porting on 1 end and a buna-n diaphragm with stainless steel springs on the other. The valve has an operating pressure of 300 psi at room temperature. The spring balanced spool helps to reduce vibration. The valve has been designed to be installed in any orientation.

The ASCO 8030G17 Power Technologies 1/2" x 7/16" Low Pressure Solenoid Valve, Normally Closed, Brass is a valve that is designed to be used as a switch. It has an N/C configuration and 3/8"" hub x 1/4"" NPT pipe thread connection and it's normally closed. The low pressure solenoid valve comes with straight through porting which makes it suitable for air and gas applications. This valve has the following dimensions: overall length plus or minus 5 degrees 15-7/8"; overall width 2-7/16"; overall height 2-7/16".

ASCO 8030G17 Power Technologies 1/2" x 7/16" Low Pressure Solenoid Valve, Normally Closed, Brass