ARGO AZ-6CP AZ-6CP 120V SIX ZONE VALVE CONTROL WITH BU

120V SIX ZONE VALVE CONTROL WITH BU

ARGO 120V SIX ZONE VALVE CONTROL WITH BU - Valve Stem ARGO AZ-6CP is a durable general purpose motor with pneumatic controls. It's ideal for industrial, commercial, and residential applications. It is multi-vapor (N2, air and inert gases) capable of delivering up to 6.5 SCFM at 90 PSIG of any gas at 77° F under vacuum conditions or 1 CFM per valve at 90 PSI

The AZ-6CP 120V six zone valve control panel is an excellent accessory for a water softener system. It is engineered to fill the needs of today's homeowner who wants a programmable control that provides maximum flexibility and ease of use. The simple-to-use controls combine with the technology of the hardwired electronic control module to create a durable, easy to install valve control solution.

The AZ-6CP provides 6 on/off, 2 stage, 3 wire zone valves and is a direct replacement for the DANFOSS SFS-6CP. It also can be used to replace any competitor's 240V 6 zone valve control with manual air flow adjustment. The AZ-6CP is designed for up to four individual 120V heat pumping systems or six individual 120V air conditioning systems. With it's built in Zone Volumes, System Pressure Relief and highly efficient DANFOSS compressor the AZ-6CP will provide long service of 10 or more years.

You can configure your system to control as few or as many valves as needed. All six zones include an over temperature protector and a medium pressure switch, which automatically shuts off the system. The CP model has a built-in pump relay that allows the unit to function without a separate relay. The AZ-6CP is ideal for use in booster systems including snow blowers, lawn mowers, sanders, etc.

Our ARGO® AZ-6CP Valve Control is our next generation of zone valve control solutions. Our unique adapter allows the unit to be mounted virtually anywhere up to 4 valves - AZ-6CP can be mounted up two at a time on a wall or in a 12" riser box, as well as other options such as: mounting on top of a manifold board, inside a cabinet, or even permenantly mounted with #10 hardware through the bottom or top.

The AZ-AZ6CP is a remote valve control unit used to control 6 separate zones of bubblers, drip irrigation or sprinklers with a single handheld unit. The AZ-AZ6CP allows the operator to independently select and adjust the output for each zone and monitor the relative flow rate of each zone.

The Zoned Valve Control is a high quality, programmable, multi-zone controller for use with Argo® (AZ) valves. The compact, IP64 rated package can be mounted in any desired location and is suitable for indoor or outdoor installation. Each zone has two control outputs and includes a high limit safety switch. A remote control option allows the user to control each zone individually from up to 50 m (164') away.