Honeywell 265792 10K ohm NTC Type II Immersion Temperature Sensor w

10K ohm NTC Type II Immersion Temperature Sensor w

The Honeywell 265792 10K ohm NTC Type II Immersion Temperature Sensor w contacts measures the temperature of liquids in a wide range of applications. It can withstand immersion in a variety of liquids, including acids, alkalies and chemicals that can be harmful to other sensors. The 23-1/2 inch (60.9 cm) cable includes a 1/8 inch (3 mm) male plug for connection to other instruments or indicators.

Honeywell 265792 10K ohm NTC Type II Immersion Temperature Sensor w

The Honeywell 265792 10K ohm NTC Type II Immersion Temperature Sensor w/20" cable is a general-purpose temperature sensor that can measure temperatures between -13 and 25 degrees Fahrenheit. This immersion probe will provide an accurate temperature reading for your applications need within that range, including controlling cooling systems, evaporators, heat exchangers, water baths and more. The 265792 is made from nickel plated brass and coated in noryl black. It features a 0 to 3 megohm impedance at 25 degrees Celsius or 77 degrees Fahrenheit with a maximum voltage of 250VAC / 125VDC.

The Honeywell 265792 10K ohm NTC Type II Immersion Temperature Sensor w/wire is designed for use with the Honeywell 3100, 4100, 5100, and 54000 Series Thermostats in applications where a submersible temperature sensor is needed.

The 265792 10K ohm NTC Type II Immersion Temperature sensors is intended for applications requiring low thermal mass and low power consumption. The sensor can be immersed directly in the medium being measured, while a fixed resistor provides the necessary connection to the controller. The NTC sensor offers excellent stability and repeatability and is appropriate for both heating and cooling applications. The more saturated the medium, the more linear the resistance.

The 10K ohm NTC type II immersion temperature sensor is used with a host device such as a portable or fixed temperature transmitter to automatically measure the liquid in a tank or process vessel, providing temperature readings every two seconds. The immersion sensor provides calibrated non-contact temperature measurements of liquids and full immersion into most liquids. The flexible silicone jacket completely covers and protects the sensing element.

The HONEYWELL® Immersion Sensor replaces the thermocouple on your temperature controller and provides added protection for your heating, cooling or electrical equipment. The sensor is designed for easy installation with standard taps available on 10K ohm, 50K ohm and 100K ohm.