Honeywell 10542 , Inc. C7061 Dynamic Self-Check Ultraviolet Flame Detecto

DYNAMIC SELF-CHECKING FLAME DETECTO

The HONEYWELL 10542, Inc. C7061 Dynamic Self-Check Ultraviolet Flame Detecto provides both visual and audible indications of a pilot light inoperative condition. The unit also indicates that the detector is properly installed on the system. The DYNAMIC SELF-CHECKING FLAME DETECTOR has been designed to provide a dynamic self-checking process that can detect potential gas leaks from an external type pilot flame without manual inspection. The detector self-checks to verify correct

The Dynamic Self-Checking Flame Detecto is designed to be the first line of defense against gas range fires. It is a compact, battery powered flame sensor that is quick and easy to install near the bottom edge of the cooking surface. It provides continuous monitoring of both burners and helps ensure instant detection if a back-draft from an electrical failure occurs.

The Dynamic Self-Checking Flame Detector automatically tests and resets its circuit every 15 seconds to verify that the flame is present. When the circuit is reset, a beep sounds on the detector to indicate the strength of the flame. If there is no flame detected, a red warning light and an alarm sound.

You need to test the flame detection systems in your home to ensure they're working properly. But turning your system off for even a day is costly and could lead to an explosion in your home. Honeywell's new C7061 Dynamic Self-Checking Flame Detector makes this very important testing safer and less intimidating than ever. There is no need for you to disconnect your wires, remove cover plates or turn off power sources when you use the easy to install C7061

This self-checking flame detector senses flame and temperature changes in a room. When the presence of either is detected, an audible alarm will sound. Therefore, if there is a fire, the heat sensor will detect increased temperatures and trigger an alarm much more quickly than conventional detectors would.

The C 7060 Flame Detecto has been designed with the user in mind by ensuring better performance and ease of use. Now with a finger-friendly push button, integrated display and an additional outlet, this new edition is even easier to use. Everyday safety and security - that's what it's all about.

Our infrared technology can detect invisible flame that human eyes cannot see. The probe tip is very sensitive and its quick response time can effectively eliminate unexpected fire condition. The dynamic signal window shows you whether the flame detector is in test or alarm state in real time. It can help you to check the existence of the flame or smoldering ashes after extinguishing an accident.