Honeywell 102045 Duct mounted Non-dispersive Infrared (NDIR) Carbon Dioxide Sensor

DUCT MOUNTED NON-DISPERSIVE INFARED CARBON DIOXIDE

Our Duct Mounted Non-dispersive Infrared Carbon Dioxide (CO2) Monitor utilizes non-dispersive infrared (NDIR) technology which is ideal for penetrating into small spaces where gas levels might be high, such as server rooms, plant closets and boiler rooms.

Our Duct Mounted Non-Dispersive Infrared (NDIR) Carbon Dioxide Sensor is module designed for area monitoring applications such as environmental or safety monitoring. The sensor responds to carbon dioxide levels in ppm (parts per million) and temperature of 10~30°C (50~85°F). Honeywell sensors are easy to install, operate, and maintain.

The Honeywell Duct Mounted Non-Dispersive Infrared (NDIR) Carbon Dioxide Sensor with HONEYWELL Smart Response Technology is manufactured for residential use only. This 21% efficient sensor is designed to mount in return air ducts to detect and signal high levels of carbon dioxide from basement or bonus rooms, as well as from attic areas in applications where a remote reading device or control unit is located downstairs.

Honeywell's Duct Mounted non-dispersive Infrared (NDIR) Carbon Dioxide Sensor is a self-contained, automatic, direct reading sensor. The CO2 sensor is designed for continuous gas monitoring and has three ranges of operation from 1000 to 7000 ppm.

The Honeywell Duct Mounted Non-Dispersive Infrared CO2 Sensor is designed to work in your building control system using thresholds to provide status and alarming with lighting, HVAC, etc. The sensors are designed for dry environments of non-conductive gases (CO2, Xylene, Smoke, etc) with a minimum lifetime of 5 years.

In a building, the carbon dioxide CO2 concentration is strongly influenced by the use of equipment and individuals' activities. The resulting carbon dioxide concentration profile can be very useful for evaluating energy efficiency and optimizing building operation. This is where non-dispersive infrared (NDIR) sensors reach their limits: profiles require a high resolution and room-temperature measurement conditions are difficult to achieve. Honeywell's duct-mountable carbon dioxide sensor solves the problem in two ways: it combines non-dispersive infrared (NDIR) technology with a patented microfluidic flow cell that provides high resolution to produce high-quality

THE 102045-NDIR IS A NON-DISPERSIVE CARBON DIOXIDE SENSOR THAT OPERATES ON 24 VOLT, 250 MHZ POWER. THE PRINCIPLE OF OPERATION HAS BEEN PROVEN ECONOMICAL FOR MEASURING CHANGES IN CARBON DIOXIDE CONCENTRATIONS IN GAS FUELS, PARTICULATE MATTRESSES, AND BLEED GASES. USED AS A VERY ACCURATE DEVICE FOR MONITORING THE FLOW RATES OF HEAVY GAS