Johnson Controls 50990 DIFFERENTIAL PRESSURE TRANSMITTER REPLACES DPT-264

DIFFERENTIAL PRESSURE TRANSMITTER REPLACES DPT-264

The 50990 Differential Pressure transmitter is a replacement for the DPT-264, and other models that share the same form-factor. It should not be used as a substitute for standard transmitters that do not use the TSI interface, or any calibration pressures less than 0 psi (0 bar).

Eaton Differential Pressure Transmitter Models : DPT-264, DPT-326, DPT-364, IN4AT560XXX where XXX equals red or blue.

The DPT-264A/W features a Polypropylene case that will stand up to the rigors of everyday use. A rubber cover protects the sensor from damage during transport and storage.

Johnson Controls' 50990 differential pressure transmitter is an accurate, rugged low pressure transmitter designed for use in demanding applications within the HVAC/R industry. The 50990 has both 4-20mA and wired remote relay capabilities for connection to any building control system.

The Johnson Controls Differential Pressure Transmitter family of products offers the very latest technology in differential pressure measurement techniques available on the market today.

The Johnson Controls 50990 Differential Pressure Transmitter is an absolute pressure transmitter with a high range of 7.25 in Hg to 52 psia and a pressure range of 0 to 1-in Hg. The transmitter can be used with multiple systems ranging from 1/8 in O.D. (0.038 cm) to 1-in O.D. (2.54 cm) tubing.

The 50990 is a differential pressure transmitter that has been designed to supply differential pressure and secondary voltage output. It is used in many applications such as oil and gas, water and steam, pharmaceutical, chemicals and power systems. Range: -100 to 100 kPa (-14.5 to 14.5 psi). Accuracy: +/-2%.

The RSX90409 is a differential pressure transmitter designed to transmit flowrate and pressure difference information from low-pressure to high-pressure environments. The RSX90409 utilizes the most popular engineering grade silicon diaphragm sensor with a Bourdon tube design and analog output.

Differential pressure transmitters are used in HVAC applications to measure differential pressure between two points, or between two pressures at two different elevations. This can be used to sense airflow, leaks, changes in height relative to level, and many other conditions.

The Johnson Controls Temperature Pressure Transmitters are designed to satisfy the most demanding applications in chemical, pulp and paper, medical, food processing, water treatment and other process industries.

WHAT THIS PRODUCT DOES