Johnson Controls 111112 DIFFERENTIAL PRESSURE SWITCH FOR USE WITH COPELAND

DIFFERENTIAL PRESSURE SWITCH FOR USE WITH COPELAND

DIFFERENTIAL PRESSURE SWITCH FOR USE WITH COPELAND RECESSED HEATER VENTILATORS, JWL-818, 818A AND 818B.

There are so many options to choose from when it comes to Johnson Controls products. We appreciate you taking your time and looking at the Johnson Controls 111112 DIFFERENTIAL PRESSURE SWITCH FOR USE WITH COPELAND product details before selecting a product.

The JCI 111112 Differential Pressure Switch provides accurate measurement and control of differential pressure in the air conditioning system. Pressure switches are used to limit condenser suction pressure or compressor discharge pressure. They are intended for use with Copeland Scroll™ reciprocating compressors.

The 111112 Johnson Controls Differential Pressure Switch is a differential pressure switch used to detect the flow and condition of gases. Features include NEMA 4X protection, compact design with two mounting options, and a 20-ft. sensor cable.

The Johnson Controls 111112 Differential Pressure Switch For Use With Copeland is a pressure switch used in air-cooled condensing units by Copeland. The Johnson Controls 111112 Differential Pressure Switch For Use With Copeland monitors the pressure difference between inlet and outlet ducts of circulation fans and stops or starts electrical motor that drives the fan to maintain the pressure difference at a set value. This type of pressure switch has a built-in thermal overload protection to avoid overheating as well as an internal reset button for easy troubleshooting.

Johnson Controls 111112 DIFFERENTIAL PRESSURE SWITCH FOR USE WITH COPELAND, SMOKE DETECTOR OR CARBON MONOXIDE DETECTOR

A manually controlled differential pressure switch for use with Copeland Scroll single and two stage air-cooled condensing units. The switch is factory set to trip at 3.0 in H2O pressure differential and has a 10 amp rating.

The Johnson Controls 111112 differential pressure switch is designed to be used with the Copeland 750 series heat pumps. The switch allows the heat pump to adjust its output based on how far away from a set point it is, for example, 50%. Adjustments can be made manually or automatically by the heat pump or an external device.

Johnson Controls 111112 DIFFERENTIAL PRESSURE SWITCH FOR USE WITH COPELAND

The Copeland 111112 is a differential pressure switch for use with Copeland scroll compressor products. The switch monitors the pressure differential across the refrigerant evaporator to control compressor operation. It also monitors the condenser water flow and temperature. The mount permits panel mounting or free standing mounting on a flat wall or enclosure, in an upright position only, using (3) #8 screws.