Johnson Controls 6814 Insulgrease Thermal conductive material

THERMAL CONDUCTIVE METAL

These unique thermal conductive metal washers transmit the thermal energy of the conductive material into the electrically insulating base material and can be used to join insulative materials for example: glass, rubber and many plastics.

THERMAL CONDUCTIVE MATERIAL FOR CUSTOM THERMAL MANAGEMENT

Insulfrease Thermal Conductive Metal is a thermal interface that replaces the traditional heat sink compound. This product has been designed for use in demanding high temperature applications such as server farms, electronic cabinets and CPUs.

THE MULTI-PURPOSE THERMAL CONDUCTIVE PASTE PRODUCES 3 TIMES THE INSULATION VALUE OF ITS INITIAL OLD DATED FORMULA. IT'S NOW AVAILABLE THROUGH RETAIL DISTRIBUTION WITH NO REZOZOL NUMBER REQUIRED.

Conductive pad is designed to be used with heating product where solder resistance is not required. It is designed to fit into the existing potting compound in most common components, providing a thermal conductivity of 3,000 - 6,000 W/m · K. The thermally conductive material spread was specifically developed for the automotive industry. It is commonly used with resistive or power components when solder with acceptable electrical performance properties is not required.

Outstanding thermal conductivity - InsulGrease exhibits an astonishingly good thermal conductivity. It has

Thermal conductive grease has many applications, especially in the field of electronics. It is used to transfer heat away from components, such as CPU's or power transistors, that can be damaged by overheating. Thermal conductive grease also reduces air flow resistance of the circuit board traces, thus increasing their transmission rate.

Our thermal conductive grease materials are designed for use in thermal management systems where good conductive thermal performance is required. Thermal conductive greases are available in three grades; Low, Medium and High, allowing you to select the best option for your application needs.

Insulgrease is a high performance thermal conductive grease formulated with a unique metal based powder. It's physical properties allow it to adhere to many substrates as well as provide excellent thermal conduction. Insulgrease will enhance the performance of any application that requires metallic-to-metallic contact.

Thermal conductive grease is used to fill the gap between the heat sink and heat source in many infrared detectors. It transfers all of the heat directly into the heat sink with minimal loss, creating a more efficient detector.

This thermal conductive grease is primarily used to interface aluminum heat sinks with silicon chips. It is also used for thermal diffusion of high power transistors.

InsulGrease is an electrical insulator to eliminate the need for bushing. It is applied at ambient temperature and permanently bonded to cable terminations. Ideal for mounting heat producing devices, it can be placed on your heat sink or heat source where it will efficiently conduct heat away through the mounting surface.