SWG-4 REPLACEMENT MOTOR KIT
SWG-4 Replacement Motor Kit is a replacement motor kit for: SWG-4RMK, SWG-4, SWG-3RMK, SWG-3
The SWG-4 Replacement Motor Kit is ideal for replacing discontinued or damaged motors. This replacement kit fits SWG-4 and SWG-4RMK Stoker® furnaces, and includes a motor shaft, field controls, factory installed terminal block with terminals, motor starter (S607), overload device (OSD1), brackets and hardware.
With over 9 million SWG-4 control boxes installed, SWG-4 replacements are available to keep your systems operating reliably. Make sure you always have a replacement motor on hand with this kit. Replacement Motor KIT includes: (2) Field Controls 46131501 replacement motors, (1) "E" Clip , (1) Field Controls M10 x 3/8" Shielded Nylon Screw
The SWG-4 Replacement Motor Kit includes (1) 46131501 SWG-4 motor, (1) 46131503 SWG-4 Capacitor, (3) 21001014 Drip Pans for Above Vessel Heaters, (3) 46253989 Support Feet for Above Vessel Heaters, and (2) 41506704 Capacitor Covers.
Our SWG-4 Replacement Motor Kits are designed to replace the factory installed motor in selected Field Controls "SWG-4" models. All replacement motor kits include a control box and a control panel. The control box contains an expandable, hardened steel rotor shaft, a governor assembly with centrifugal switch, a shear key, a thermistor and associated wiring. A control panel contains a variable speed reversing switch, a power cord, and associated wiring. Control panels and control boxes are interchangeable within each model, so when replacing an existing motor it is always possible to keep the original control panel or to change out the
The SWG-4RMK Replacement Motor Kit is designed for use with the following field controls: – Field Controls SWG-4RMK Water Cooled Gas Valve
The SWG-4RMK is an exact replacement motor kit that comes from the factory with a heavy-duty fence, 4 position indexing plunger switch, and low voltage disconnect.