General Electric 381044 GLASS FUSE;

GLASS FUSE;

This GLASS FUSE fits window air conditioner models ARS08NAW0(0), ARS08NAB0, ARS08NABW, PHS08NAB0A, PHS08NAB0W, PHS08NABWL.

GLASS FUSE,400 AMPERE, 800 VOLT,20 X 40MM--GENERAL ELECTRIC

The GE glass fuse is for use with 1/8" thick glass.

The GE 381044 glass fuse features a nickel-plated casement with fused silica filament. It is used for general-purpose applications to provide surge protection, limiting voltage to a safe value by conducting excess current from the connected circuits.

This Glass Tube Fuse is designed to fit GE under-the-cabinet lighting fixtures. It has a voltage rating of 125V, 0.08A, 500mA epoxy type inline fuse, UL approved.

When you need to replace the fuse in your home, we make it easy with this single glass tube, inline fuse. If there is a problem with your lighting, with our relabelled fuses you will know which fuse to replace and can do so quickly. With a variety of amperage power ratings available you will be able to easily find the right one for your needs;

Quality, safety and durability are combined in this fused glass electric range. The glass top is a colorful example of the beauty of heated glass.

A fuse is a safety device used to protect motors and other electrical devices from damage resulting from an overload or short circuits. This product is designed to be installed in the fuse box at the main power supply source for your home. It is designed to prevent overloads in branch circuits.

The fuse is used to protect the motor from overload or short circuit. Overload means there is too much current flow for the motor. Short circuit means there is not enough current flow for the motor. Normally, if this fuse burns it will not go all the way out or even spark. It will just get hot enough to melt the end that is attached to wire.

The circuit breaker for consumer grade products that accept or feed anywhere from 50V to 250V. The front of the cartridge is clear glass, so it's easy to tell if there's still current flowing in the line.

Retrofit kits for fluorescent light fixtures, including the ballast/receiver, reflector body, tubular or strip tube and housing

The replacement part should not be used to replace any other parts or devices unless noted in the specification description.