Belimo 62742 Damper Actuator, Proportional Control, Non-Spring Return, Direct Coupled, Nema 4, No Auxiliary Switch, 24 V.

US 24V DIRECT COUPLED NON-SPRING RE

The Proportional Non-Spring Return Damper Actuator is a DIRECT COUPLED NON-SPRING RE return actuator with a pressure range of 0.2 to 2.5" W.C. The proportional non-spring return actuator is used to control dampers on air systems in heating, ventilation, and air-conditioning applications. The valve has an input voltage of 24 volts DC, with a nominal frequency of 50Hz or 60Hz.

This 24V proportional control damper actuator has no electric auxiliary contact, direct coupling and non-spring return. Belimo 62742

The Belimo 62742 non-spring return proportional control for damper actuation is designed for use in air conditioning and ventilation systems with external coordination. The control can be used in systems where free or proportional positioning of the damper may be required. The control features a direct coupled actuator with a built-in position feedback potentiometer. The control actuator has smooth and precise motion characteristics while returning to the initial position when spring biased by means of torque motor, so any shock loads are

Belimo 62742 damper actuator, proportional control, non-spring return, direct coupled, Nema 4, no aux switch/marker light.

The Belimo damper actuator is used to control the fog, steam and smoke dampers of a commercial hood. The damper actuator is non-spring return type with proportional control and no auxiliary switch. The maximum speed can be adjusted by means of a potentiometer mounted on the actuator. The 62742 damper actuator incorporates a 24V linear actuating coil. This damper actuator can be directly coupled to any electrical supply voltage including AC and DC.

Direct coupled, proportional control ventilator designed for continuous and intermittent venting applications in residential or commercial applications. Particularly suitable for bathroom fan, kitchen hoods, and comfort ventilation.

The 62742 damper actuator is a proportional type control for lead-lag linkage damper systems. It has a direct, non-spring return and a 12-tooth gearbox with a 4:1 reduction ratio. This actuator with 24 V DC provides for close control of 0% to 100% set point position. The shaft is made from heavy duty stainless steel and the gearbox from machined aluminum.