Home and Improvement

Fan Control Board KitFan Control Board Kit to fit Ruud Model 47-22481-81 This is for a Fan Control Board for a Ruud model 47-22521-61This is a RHEEM Fan Control Board Kit designed to fit and work with your existing Rheem unit.The Ruud Fan Control Board...

1/3HP 208-230V 1075RPM 48 MtrThis Ruud 1/3HP 208-230V 1075RPM 48 Mtr Condenser Fan Motor is designed for condensing unit packages of 30 or 36,000 Btuh with a single speed scroll compressor.Rheem 51-100998-30 -Ruud 1/3 HP 208-230V 1075RPM 48 MtrRHEEM...

1/3hp 208/230 1ph 1075rpm CondIt's time to take a trip down memory lane: The Rheem 51-102008-09 -Ruud 1/3hp 208/230 1ph 1075rpm Condenser Fan Motor was used in some older air conditioning units, and you'll need it if you want to get your unit up and...

5HP 208-230/460V 1725RPM Motor

1/2HP 120V 1075RPM 4 SPEEDThe RHEEM 1/2HP 120V 1075RPM 4 SPEED is a water heater that can be used for indoor as well as outdoor use. Just like more expensive models, this model has also the ability to let warm water run through its tank while it is in...

"Permanent Filter 12""x20""x3/8"""Rheem Permanent Filter is designed for all Rheem Models. Keeps impurities from entering water tank. Replace filter every 12 to 18 months.Automatic chlorinators and pad cells require a filter for the proper maintenance of...

1/2" HSI/DSI Modulating NG VlvBacked by an outstanding limited lifetime warranty, the RUUD 1/2-inch HSI/DSI Modulating NG Vertical Load Air Conditioner is designed to meet both residential and commercial needs. This unit features R-410A refrigerant and a...

1 1/2 TON R410A TXVA Trane RHEEM 61-104031-04 1 1/2 TON R410A TXV split system air conditioner will keep you cool in the summertime and warm in the wintertime.Rheem Ruud 61-104031-04 1 1/2 TON R410A TXV is a R410a Air Conditioning System that provides...

SERVICE VALVE - SUCTIONIf you have a Ruud unit, your Service valve may be leaking. This is one of the most common problems on Ruud units. This replacement service valve - suction will solve your problem.Ensure your system is ready to operate when you...

Integrated Furnace BoardThe Ruud Integrated Furnace Board features an intelligent wiring layout to provide master terminal services and zone addressing via one addressable device. A green board option is offered that includes an advanced power stage for...

Flame SensorThe Flame Sensor is a unique patented flame detection device, monitoring the burner flame during operation. It provides the thermostat with a differential sensing signal when flame is present or absent, enabling increased control accuracy,...

Flame SensorThe Flame Sensor easily installs in fuel gas return lines, and combines with the Remote Pilot Module to automatically shut off the gas supply if a flame is lost.The Flame Sensor by Rheem replaces the standard flame rod and is flared at the...

Direct Spark IgnitorThe Direct Spark Ignitor is a specially designed part that mounts directly to the burner head. It converts pilot burner flame thermal energy into electrical energy that allows the gas valve to open and start the main burner ignition...

Exhaust TransitionThe Exhaust Transition is designed to easily connect to the gas stub out on a Rheem condensing unit.Exhaust Transition~~~Exhaust Transition~~~The exhaust transition will help convert your 3" x 12" vent stack to connect to the 6" round...

Induced Draft Blower GasketInduced Draft Blower GasketThis Induced Draft Blower Gasket works with the following models and part numbers; 68-24016, 68-24017, 68-24019, 68-24021Rheem Induced Draft Blower Gasket is a genuine OEM Rheem replacement part. Use...