Honeywell 12105 , Inc. Motor and Actuator Accessories Adjustable Motor Crank.

CRANK ARM ASSY

For use with 1/4 and 3/16 HP electric motors, the 12105 is a crank arm assembly for variable speed control. It bolts onto motor support to provide crank angle selection with a right angle gearbox as well as an electric reversing switch.

Fit your Flexsys abrasive blast cabinet with an internal motor and automatic forward/reverse cranking without purchasing the entire assembly. This crank arm replaces part number 767374, and attaches directly to existing gear housing.

The adjustable crank arm assembly is designed to rotate the Honeywell E12 motor. This arm is used in a variety of applications in which the operator must be able to adjust the position of the motor

The crank arm is designed to fit most major brands of adjustable mounts. The shank is sold by the inch to the nearest 1/8?. The overall length (OAL) is measured from the end of one shaft to the end of the other. The distance between center-to-center on two rollers or pulleys is generally measured from the bearing face (not including the roller width).

Designed for use with Honeywell actuators, this adjustable motor crank provides the means to override an actuator in a system where a separate motor is not used. A special service tool is required to attach the crank arm assembly to the servo-mounted actuator.

Match your motor with one of our most flexible cranks and get the competitive edge you want for your application. Our new Sprocket Crank Arrangement allows users to change the tooth configuration of the sprocket attachment, thus allowing a variety of input speeds to match numerous applications. Now includes an Actuator Accessory: Reversible Dial Actuator C-6Y9-16-IAX-C.

The 1/2" x 1" Metal & Plastic Adjustable Crank is suitable for use with 3253 Series, 4160 Series and 4180 Series Fan Motors. The crank assembly can be rotated 360 degrees and has up to a 4-ft ' throw'.