Honeywell 6084 Pneumatic Thermostat, Reverse Acting, 2 Pipes, 60 F.

PNEUMATIC THERMOSTAT, R.A. 2-PIPE CONVERTASTAT W/S

The Honeywell 6084 is a pneumatic thermostat, reverse acting, two-pipe convertible stat from Honeywell. It has a 62 to 88 degree F temp range and 113/221 degree F operating coil. This 2-pipe heavy duty thermostat has the following features: .25 inch service connection, 20 minute quick connect coupling adapter included

The Honeywell 6084 is a two pipe convertastat that is used for setting the temperature in a forced air heating system. This control does require an adapter to work on a 2-pipe conversion. Honeywell 5823A, 5842A, 5843A & 5316D-2 required adapter kit 5938B - Part number: (5300Z21)

This reverse acting two pipe ConvertaStat lets you choose which side of the heating system to be controlled. A convenient control allows you to set the temperature on either side. The large digital numbers in green show the set and actual temperatures, enabling simple and accurate setting. Reverse acting thermostats also prevent against nuisance tripping when not applicable (i.e. when suppliers provide additional zone heat for comfort).

Pneumatic Thermostat, Reverse Acting, 2 Pipes, 60 F This thermister controls humidifier or any reversing valve that works from a sealed, centrally located tank. The Raised base has unit...

For a pneumatic thermostat, the 6084 has large brass terminals for easy wiring and a special terminal for use with the ConvertaStat. The 3/4" valve stems can be used on 2 to 4 pipe systems.

The Honeywell 6084 Pneumatic Reverse Acting Thermostat is designed to be used on top of non-siphoned oil or gas furnaces. This easy-to-install thermostat features a large dial with an adjustable hand wheel. The two-pipe design of the Pneumatic Thermostat offers a lower operating amp and control voltage, so it runs more efficiently and lasts longer than comparable models. It measures 1 3/4 inch by 3 inch by 6 7/8

The Honeywell 60-8420 ConvertaStat allows for more climate control options. It is a pneumatic thermostat, reverse acting, with two (2) pneumatic terminals that control the temperature of 2 heating and/or cooling systems. The main honeywell unit is stationary and the secondary unit is sliding or removable to convert from heating to cooling and back. To convert to cooling, the secondary thermostat slides from the front of the main unit to sit at a 45Â