×
Free Shipping @ Any Price
Best Price GUARANTEE
30 days money back
Honeywell - MS8110A1008 - Electric Actuator, 88 in.-lb., -40 to140
click to zoom in
  • sku METO-141493
  • upc 085267241113
  • Weight: 0.00 LBS

Honeywell - MS8110A1008 - Electric Actuator, 88 in.-lb., -40 to140

MSRP: $353.70
(You save $84.59 )
Price: 2099-12-31 $269.11
Free Shipping
In stock
1 days
  • Shopper Award

24V SPRING RETURN TWO-POSITION DIRECT COUPLED ACTU

Our direct coupled actuators are ideal for a wide range of applications. These 24V spring return direct coupled actuators feature a two-position, snap-action lever, a 3 cm (1.18 in.) travel and 88 in.-lb. maximum force with a rated current of 125 A.

The MS8110A series of actuators are permanent magnet brushless DC servo motors. The major components of the motor are contained in a compact, die cast aluminum housing which is rigidly mounted to an aluminum base plate. The entire assembly is sealed and permanently lubricated. The spring return two-position direct coupled actuator provides a precise, repeatable motion. Depending on model, it may accept either a spring or torque feedback signal for position control. This output signal can be wired to an encoder, counter, or other device for additional feedback

Our two-position direct coupled actuators are for use on electric applications only. Actuators are available with spring return or ramped return and come with a frame and one end-of-travel snap ring, making it easier to mount the actuator on your application. The units can be easily adapted to push or pull applications, and have a UL recognized brake rated as a safety device when used in conjunction with an approved end-of-travel switch.

This 24V AC powered electric actuator is typically used with systems with a power range from -40°F to +140°F. Standard voltage options include 208-230 and 460 VAC. A high temperature version is also available for higher temperatures. The actuator has an operating force of 88 in.-lb. for two position switching. It features spring return to the home position when de-energized and a V2 fail safe rating for highest trip integrity in hazardous environments. The direct coupled actuator starts and stops under full control of the controller, eliminating delay caused by cranking and other inertia effects that can

Take the stress out of closing your fans, vents/shutters, and other industrial doors. The MS8110A1008 electric actuator is a direct coupled two position, spring return actuator that provides positive closure of doors up to 28" wide and 40" high. The actuator can be mounted to either side of the door using a mounting plate with holes drilled in accordance to ANSI standards; four screws are included for installing the plate.

The MS8110A1008 is an electric actuator, two-position, two-way direct coupled actuator. The port size is 3/4" NPTF. 0.31 Nm (3.2 in.-lb.) maximum torque per ANSI B93.1/C145, the MS8110A1008 may be used for load limits up to 3500 lbf (15.9 kN). The maximum operating speed is 100 in./min (254 cm/min).

The Optimus Pressure Switch Electronic Kit (2-Position) includes an E-switch actuator, pressure transmitter, two contact blocks and 4 feet of cable. This actuator features dual position 24 VDC spring return with a pressure rating of 0 – 140 psi (0 – 900 kPa). The Optimus Pressure Switch (E-switch) allows for manual control with either normally open or normally closed electrical control outputs.

1 days
  • upc 085267241113
  • Weight: 0.00 LBS
  • Date First Available :June 3, 2013
  • Manufacturer:Honeywell
  • Item Weight:12 ounces
  • Package Dimensions :10 x 4 x 3 inches
to top