Honeywell M9164D1009 Modutrol IV Motor, 24V, 35 lb. 24V NON-SPRING RETURN MODULATING VALVE ACTUATOR

24V NON-SPRING RETURN MODULATING VALVE ACTUATOR

The 24V Non-Spring Return Modulating Valve Actuator has the latching actuator end and a normally closed or latched position. The valve means that this actuator latches in the "On" or fully opened position, and is safe from accidental activation.

This is a Honeywell Modutrol IV 24 V 35 lb. Non-Spring return Modulating valve Actuator. The manufacturer part number is M9164D1009.

The Honeywell M9164D1009 3/4 Horsepower, 24V ASA Motor, is designed for actuators in non-spring return modulating valves. It has a ¼ HP rating, and a 35 lb. of torque rating. Controls current: 6 Amps max, Voltage: 24 Volts DC.

This 24 volt, 0.25 amp actuator provides non-spring return modulating control for electric tank type water heaters used in residential and commercial applications. Maximum pressure rating is 80 psi. The 2NMI-35BC is an explosion proof motor with SAE standard connector, built in level sensor and incorporates a Bimetallic element to electrically limit motor torque at any position of rotation.

The Modutrol motor is the actuator used to open and close neutral control valves on installation in which the energy source being used is non-spring return. The Modutrol motor gives 24V, 35 lb. of torque to perform the task at a much higher efficiency than an air or spring return actuator. But just like any other valve actuator, this motor needs to be maintained and operated properly for safe and effective performance.

The M9164d1009 is a non-spring return Modutrol IV motor, 24 volt 35 lb. The motor is designed for use with the same valve actuator, model M9164d1028. This motor has no spring return.

The M9164D1009 is a Modutrol IV, 24 volt, 35 lb. motor rated for non-spring return motor applications. It features a hinged mounting base, all steel construction, and a high temperature enamel paint finish. The sealed ball bearings protect against moisture and foreign material intrusion. This unit will power non-spring return valves only.