Honeywell MS4104F1210 , Inc. 120vFireSmoke30#2posSR 2sw Act

120vFireSmoke30#2posSR 2sw Act

A complete fire alarm solution, the SR2SRW is packed with a variety of features that make sure you have everything you need to protect your home. At the heart of this smoke and combination detector is an optical ionization sensor which creates an invisible beam of light that passes over particles in the air. A clean stream of particles means nothing is present and all is safe, but if particles are present it breaks that invisible beam causing a trip that alerts you to the presence of smoke or fire. It comes with a Honeywell Fire Code poster so you can be informed and trained about what to do in case of an emergency.

The MS4104 is a dual element, self-contained portable fire/smoke evacuation system that provides protection in a variety of applications. When the easily accessible switch is activated, the unit will automatically: (1) Shut off Electrical power to the area being protected; (2) Discharge stored Halon 1301 gas; (3) Activate an audible alarm; and (4) Provide visible discharge for 60 seconds. The two position selector switch has a test feature on the handle to check function and ensure proper operation. When not in use, store the MS4104 in an upright position on a level surface near its

The 120V MS4104F12/10, 120V MS4104F12/15, 120V MS4104W12/10, 120V MS4104W12/15 and 240V MS4104N1400 are four-in-one smoke alarms with a 10 year life. These models are designed to detect fast flaming and slow smoldering fires. They also include the ability to detect 3 levels of carbon monoxide gas.

The MS4100 Series Smoke Alarm is a hardwired, interconnectable device designed to sound the alarm in multiple locations. This wired alarm monitors for smoke and other types of fire through ten year self-test and battery back-up.

This unit features a sturdy blow molded frame, fully polished steel electrode, long lasting radial-flow fan wheel, and an automatic thermal shut off.

The MS4104F1210 is a halogen convection/radiant type electric fireplace with a metal housing and paddle control for flame height adjustment. The fireplace will operate in fan only mode, unless there is insufficient airflow through the unit (less than 9.8 CFM). Measures 14.5H-17W-16D. UL listed.

Although it is normally used as a smoke and fire detector, the Honeywell M7014F1210 is also designed to be used as a carbon monoxide detector. This detector has four functions which are told through LED lights on the detector. The four functions are trouble, low battery, silence/test alarm and alarm.