Honeywell MS4604F1210 230vFireSmoke30#2posSR 2sw Act

230vFireSmoke30#2posSR 2sw Act

The MODEL MS4604F1210 230vFireSmoke30#2posSR 2sw Act is a non-metered, two-position, self-contained discharge smoke detector. It complies with the requirements of Underwriters Laboratories, Inc., UL2034 Standard for Residential Audio Visual Security Systems and National Fire Protection Association Standards: 1973, 1981, 1983 and 1984.

Fire Smoke 30#2posSR 2sw Act

Honeywell MS4604F1210 230v Fire/Smoke Detector White/Black 2-Wire, 30' (9.14m) Two Wire Sensor With Release For Supervised Remote

The MS4604F Honeywell Fire Smoke Detector features a replaceable 10-year lithium battery and a 5 year sealed immersion (buried) photoelectric sensor for improved sensitivity. It has 4-30mA, 2 Zone, 2 Switch Outputs for connecting multiple detectors in fire alarm and security systems, and ULC Listed for both Canadian and US applications.

The Honeywell MS4604F1210 is a 4 kW motorised fire smoke detector with a combined 30 minute / 3kW rating. It features two 24V AC/DC electromechanical relays rated at 2A/24V DC rated at 2A and 30mA.

The MS4604F is a 230VAC, positive pressure, non-planetary type smoke/fire detector with built-in sounder and photoelectric sensor. Its non-planetary technology virtually eliminates nuisance alarms for auxiliary equipment such as motor contactors or steam traps. Built into the detector is a two-stage filter system designed to protect the sensing unit. It controls contaminants in gases emitted by ordinary household fires, and reduces the detection threshold level of certain gases, such as SO2 and H2S. This temperature compensated detector sets a high standard in protection from hazards created by fire and smoke.

Honeywell's MS4604F1210 Electronic Fire/Smoke Detector is just the component you need to complete your fire alarm system. It is designed to work with any Honeywell RPS-6 circuit board, and will arrive factory set with a calibration of 600mA@9-28VDC. The HFD30-2S is an all purpose device that works very well in most industrial environments as well as lower hazard commercial settings. The detector has an end of life warning signal to alert you when it no longer meets the requirements of your project.