Honeywell MS8109F1010 24vFireSmoke80#2posSR Act 24vFireSmoke80#2posSR Act

24vFireSmoke80#2posSR Act

24vFireSmoke80#2posSR Act

The Honeywell Fire Smoke Sensor is a dual sensor smoke alarm with a ten-year life to meet the latest fire safety regulations. It features a maintenance free CO sensor and an end of life warning that alerts you when your sensors need replacing. The bright 2.5V green LED indicates good power at the detector outlet and the tamper proof connector ensures that the connection remains secure. The 24vFireSmoke80#2posSR Act is suitable for ceiling mounting only.

The Fire-Smoke 80 Series 2 in. Positive Position 1/2 in. NPSB (Female) Normally Open Double Check Fire Alarm Control Valve is used to control automatic electrical fire and smoke detection systems including wet chemical, carbon monoxide, heat detectors, or other devices with the same type of actuation. It is resistive actuated and is not designed for use with a separate initiating device.

The Honeywell 24V Fire/Smoke Alarm system is designed for the protection of buildings or areas that are not continually occupied but require the detection and notification of a fire or smoke condition. It incorporates a comprehensive range of Z-Wave enabled sensors and devices. The MS8109F1010 System consists of the following components: (1) Base Unit, (2) keypad, (1) Door/Window insert, Sonic sounder; [email protected] is standard on all devices, and (1) motion detector with external magnet.

A slim alternative to traditional heat detectors, this Heat Detector features a wide surface and long-range detection that can cover an extra doorway or hallway. The Heat Detector is designed for use with a 24-volt hardwired system.

The first and only monitoring system that notifies you about smoke or fire events while they are happening. Two way voice communication with the home owner/ operator warns them of any real danger and gives them the option to take action or to call the authorities. This is the only system that can trigger a wired alarm relay for locks. Alerts can be sent to pagers, cell phones, email addresses, two-way texting devices, etc.

Samsung Fire & Smoke Alarm provides early warning of a fire in your home or business. With a distinctive bell sound and front access test button, it alerts everyone in the building at the first signs of smoke. With Easy installation and advanced technology, this is the right choice for any application.