Honeywell MS8104F1010 24vFireSmoke30#2PosSR Actuator 24vFireSmoke30#2PosSR Actuator

24vFireSmoke30#2PosSR Actuator

The 24vFireSmoke30#2PosSR Actuator

A true innovation in fire suppression control, the 24vFireSmoke30#2PosSR Actuator from Honeywell is the most powerful gas detector actuator system. Quickly detect and respond to fire and smoke, this device helps protect your business and give you peace of mind. It measures about 0.00"H x 2.00"W x 3"L.

This 24vFireSmoke30#2PosSR Actuator is a genuine Honeywell fire alarm control panel module. The Honeywell MS8104F1010 is a metal sign plate and frame assembly. It contains one smoke detector input relay module with 30 lbs Sealed Reed Switch contact operation.

The Honeywell MS8104F1010 24vFireSmoke30#2PosSR Actuator is an electrical solenoid that is designed to sense utility gas pressure. The fire smoke 30# actuator is designed to interact with the 24vFireSmoke30#2PosSR(Actuator) Control. Connect the Fire Smoke 30# Actuator to 120 Vac using conduit and an appropriate cable that matches the voltage of the force unit. Connections can be made via terminal blocks or quick connect terminals. Use wire labels or other suitable means to ensure connections are properly identified.

What makes the Honeywell 24vFireSmoke30#2PosSR Actuator better? No need to select an actuator based on box specs. Instead, select your battery capacity and door thickness for the right actuator. This item is designed to meet the maximum code requirements of NFPA80 which includes testing of fire conditions in accordance with UL 10C. (Actuation force values shown are maximum for compliance to NFPA80.)

The Honeywell 24V FireSmoke30#2PosSR Actuator is an advanced microprocessor-based fire and smoke control system that detects changes in heat, air flow, smoke presence and other factors combined with a unique self-diagnostic function to provide the ability to anticipate and quickly respond to unwanted conditions.

The Honeywell MS8104F1010 24V FireSmoke30#2PosSR Actuator features a manual reset to confirm the reset of the fire alarm control panel before smoke clears. This is ideal for applications where end users may have limited electrical knowledge or little time to react. It also includes a sensor loop interface that allows for an additional loop wired into the partition. It also provides a single initiating output and dual relays for two levels of alarm signalling, a facility for battery backup power and a tamper-resistant lock out mechanism