Honeywell V4295A1064 , Inc. 2 inch Solenoid Gas Valve, 3465 CFH

"2""N/C 120V SOL.VLV

The Honeywell V4295A1064 is a 2" N/C gas valve that can be used as a barbecuing accessory with its pressure release valve. The ¾" brass inlet tee will allow you to connect to the natural gas line, and the 3465 cfh allows for quick recovery of barbecue gas."

The V4295A Solenoid gas valve is designed for use with liquid propane when natural Al is used as a refrigerant. The valve has a voltage rating of 120V, and a flow control range of .27"" to 3465"" CFH. This rugged and reliable machine is constructed with stainless steel for long life, and utilizes a rotary-shaft-type actuator. Overall dimensions are 5""W x 4 1/4 ""D x 7 7/8"""H.

Two-wire, 120Volt solenoid valve provides proportional or modulating flows for precise control of gas flow to the burner. Valve has a GALVANIZED VALVE BODY and a PLATE between the inlet and outlet ports for protection against leakage."

The V4295-A1064 is a direct acting, two-way, normally closed solenoid valve that is used to control gas flow. The Solenoid Valve opens and closes in response to an electrical current switching between an open and closed state. When the coil is energized the diaphragm moves out from the center seat of the valve body, allowing flow through the passage. When the energizing current is interrupted, the diaphragm returns to its center position, closing off flow through the passage."

This normal closed, 2"" valve is Gas actuated and has a UL listed number to indicate compliance with Underwriter Laboratory safety standards. It is compact in design and includes a two piece body with integral seals to reduce leakage, an adjustable seat for reliable long term seal function, and an external control knob for easy access to continuously variable-percentage cut-off.

Our selection of gas valves covers a wide set of applications and includes frost-proof valves, normally closed (N/C) and normally open (N/L) valves. Our solenoid coils are extremely reliable, tested for leak proof. Honeywell products go through a rigorous quality control process to ensure they meet product quality standards.

The V4295 is a 2" solenoid gas valve designed for use with natural gas to control the pilot supply to welders or portable fuel-powered devices such as air compressors, generators and other industrial equipment used in industrial plants, warehouses, commercial and institutional buildings.