Honeywell V8043B1076 , Inc. 3/4 inch Two-Position Normally Open Zone Valve, NPT, 3.5 Cv

24V ZONE VALVE (3/4" IPS 3.5 CV N.O.)

The V8043B 1076 zone valve is a two-position normally open zone valve with a handle for easy on/off control of water which is 3/4? IPS 3.5 CV N.O. for 24V applications and includes “AA” hardware included in assembly.

For Commercial applications such as fire protection, medical gases, or laboratory applications. 24 Volt Z.O. Zone Valve 3/4" IPS 3.5 CNL P.T.F.E.

The Honeywell V8043B1076, Inc. 3/4 inch Two-Position Normally Open Zone Valve, NPT, 3.5 Cv is a normally open valve with normal force of 190 lb and a flow rate of 2.2 GPM at 80 psi that features three independent functions, instantaneous power off/on, manual mode override, zone-to-zone mixing via pilot circuit, 24 VDC supply voltage, back feed protection & electrical interlock options.

The Honeywell V8043B1076 24V Zone Valve is a standalone, normally open, zone valve. It features vertical proportional VG-friendly actuator that makes it ideal for demanding commercial and industrial applications. This valve can be used on snowmelt or fire sprinkler valves or systems and can be installed vertically or horizontally. The Honeywell V8043B1076 comes with a five years limited warranty and easy installation steps.

Define your watering ZONE with Honeywell, the industry leader in water management. 24 Volt Zone Valve is designed to be easy to install. or maintain Project requirements are fully considered.

The V8043B1076 zone valve (Honeywell #7911) is a normally open, two-position zone valve rated for 24 volt ANSI Z21.15 performance. It provides simultaneous 24 volt control signals to a normally open expansion chamber for controlling two signal devices. The zone valve has a two position knob for use as an on/off or full flow function. The normally open actuator styles are suitable for use as part of an integrated hand shower system or backflow prevention device utilized with mixing valves.

The 24-Volt Zone Valve from Honeywell's Vista Series is a direct heating/cooling control that operates one zone of larger commercial building HVAC systems. The valve replaces up to three current hot-water thermostats, resulting in energy savings and cost avoidance.