ICM Controls ICM401 Three-Phase Line Voltage Monitor Offering Protection Against Phase Loss/Reversal and Unbalance 50/60 Hz, 190-600 VAC (18-30 Control VAC)

3phaseMont.190-600vacPhL&RevPr

The ICM401 is an industrial 3 phase line voltage monitor. It can be used as a power quality tool to provide signal isolation and protection against phase loss / reversal and unbalance 50/60 Hz, 190-600 VAC (18-30 Control VAC). * Calibration will be specific to the issuing country as determined by customer location.

* Features: * Phase Loss & Reversal Protection * Three Phase Unbalance Protection * Unique Overload Relay Alarm &/or Tripping Relay Outputs with LED and Alarm * Adjustable Input Torque (0-50A) * Secondary Overload Trip, Full Load Cycle or Maximum Amperage * Adjustable Trip Levels (0.1-6.0% Total Loading) * Primary Overload Alarm for High Instantaneous Incoming Current (Over 500%) *

ICM Controls ICM401 Three-Phase Line Voltage Monitor * The ICM401 is a panel mount, non-indicating, line voltage monitor designed for monitoring of three-phase 240 volt power. It can also be used to monitor the balancing voltage of a three-phase circuit. The ICM401 has an adjustable trip point and operates on a wide range of input voltages. Large single line LCD display indicates, for example, MAIN = phase A, 230vac , BAL =

ICM controls ICM401 Three-Phase Line Voltage Monitor offers protection against phase loss/reversal and unbalance. It?s fitted with LED indicators showing phase loss (0-10V), undervoltage alarm as well as Over Voltage (17V) protection. Using advanced 3ph signal processing technology, it guarantees an extremely stable performance for line voltage monitoring.

The Model ICM401 Three-Phase Line Voltage Monitor is an electronic instrument designed to provide protection against phase loss and reversal, and unbalance in three-phase electrical systems. The ICM401 is capable of monitoring the line voltage in accordance with 3/XL 112.

Protect your site with the ICM 401 Three-Phase Line Voltage Monitor from ICM Controls. The ICM 401 monitors three-phase voltages and trip circuits for phase loss, phase reversal, and unbalance. This three-phase monitor measures true power phase voltages output from the digital communications module (DCO) for each phase. Phase loss, or a complete interruption of one of the three electrical power sources supplying a motor bank, as determined by an analysis of the data collected from the phases

The ICM401 three-phase line voltage monitor offers protection against phase loss/reversal and unbalance in 50 Hz and 60 Hz. It safes energy consumption by detecting and preventing reverse current flows, and goes a step further with an Unbalance Factor feature that ensures that loads are balanced. Features include three isolated outputs: active low, protection indication, unbalance factor, imbalance ratio, External indication of status (ACT), function selection via 3-position DIP-switch.