JOHNSON CONTROLS 113443 ENCAPSULATED PRESSURE SWITCH LOW CUTOUT, OPENS ON

ENCAPSULATED PRESSURE SWITCH LOW CUTOUT, OPENS ON

Johnson Controls ENCAPSULATED PRESSURE SWITCH LOW CUTOUT, OPENS ON - 113443 . You are bidding on a New part in the Original box. It is ready to ship. We offer a 30 day warranty. So if you have any problems just contact us and we will resolve any issue you might have.

The 113443 is a Encapsulated Pressure Switch Low Cutout, Opens On. It features a 1/2" NPT Connection, 1/2" NPT Connection and Solid Brass Construction. A pressure switch cuts power to the heater when water pressure drops.

Johnson Controls 113443 Enclosed Pressure Switch Low Cutout, Open on Pressure with internal diaphragm is intended for use with air distribution systems to control the operation of equipment.

This encased pressure switch cuts off a building's normal supply of oil to the burner of a gas-fired furnace or boiler when high or low pressure is reached. It helps prevent damage from overheated, low-pressure oil caused by pipe leaks, defective controls, or improper burner operation.

Low pressure cutout switches operate steam traps to protect heating systems from low-pressure backflow conditions.

The 3-port pressure relief switch is a direct replacement for older two port switches providing redundant pressure switch protection. 115/230VAC 50-60/60Hz 1.5A 0.6KW max. -20° to 48°C (0° to 120°F) 10 psi < 150< psig (800 kPa < 10 bar) SPC Series: SPC113443E-30SIP11

Protects equipment and provides proper pressure sensing for fully operational unit. The switch has a lockout device to prevent the installation of an incorrect assembly. Reduces the need for manual testing when repairing or replacing a failed assembly.