JOHNSON CONTROLS 317624 Electronic Single Stage Temperature Control, 120/2 VAC, UL TYPE 1, IP20, SPDT, Single

Electronic Single Stage Temperature Control, 120/2 VAC, UL TYPE 1, IP20, SPDT, Single

The 317624 Electrical Electronic Single Stage Temperature Control (120/2 VAC,UL TYPE 1,IP20,SPDT,Single) is a push-button single stage control with an adjustable thermostat. The adjustment knob is located on the top of the case for easy access. The 317624 can be used for residential or commercial applications and is ideal for use as a heat, air conditioning or dehumidification control. Voltages: 120VAC, Hertz: 60Hz, Frequency: AC Power: 2.0Amp

Single Stage Electronic Temperature Control, 120/2 VAC, with nylon bushing and NEMA 6-15P and 5-20R wiring

The JCI 317624 is a 120/2 VAC electronic single stage temperature control, UL Recognized (E803984), CSA Certified (LR614071).

The Johnson Controls 317624 Electronic Single Stage Temperature Control is capable of regulating temperatures from 5 to 20 degrees when used with an appropriate supply. This adjustable temperature control is ideal for use in process control, industrial manufacturing, and HVAC systems. It features an SPDT electrical switch that can be configured for normally open or normally closed operation to address a wide range of thermal management needs.

Single Stage Electronic Temperature Controls with Large Paddle Type Controller, Enclosure Type: IP20, Power Rating: 2/2.0 HP @ 120/208 VAC, Phase: Single, Voltage: 120/208 VAC

Simple, easy installation and clean lines are just two reasons why the Johnson Controls JCI-317624 Electronic Single Stage Temperature controllers are a great choice. In addition, the use of thermoplastic side trim, a powder coat finish in white or black to match any decor and a smooth operating snap action switch add to the overall quality. The design is UL Listed for Type 1 Divisions 1 and 2 applications where a fire-resistance rating is required by code.

JOHNSON CONTROLS Individually Actuated Temperature Control, 1 Heating Coil. 120/230 VAC SOFT START. Features: Soft Start -- a transitional start temperature process that eliminates the initial surge charge of current to the heating element and provides for a smoother, more gradual startup of the heating element. The soft start feature will delay the heat-up period and lessen impact to mechanical systems by reducing inrush currents. NEMA 1 Control Enclosure -- For indoor use only. IP20 rated and suitable for control wiring within conduit with min 1/2" clearance on each side (other than in conduit). 128