Johnson Controls P499ACP-107 - K - Pressure Transducer, 0 to 750 PSI

PRESSURE TRANS 0-750 PSIG

The P499ACP-107 Pressure Transducer, -K, 0 to 750 PSIG from Johnson Controls features a K-Style thermowell, 45 Ft Sensor Lead with quick connect plug and a Sensor mounting plate. It has a max operating pressure of 750 PSIG and a minimum operating pressure of 0 PSIG. The load output is 1 stainless steel conduit. It employs wired 4-20 mA signal output and it's dimensions are 2.9"H x 4.9"L x 1.9"W.

The P499ACP-107 is a 0-750 PSIG pressure transducer with 4 to 20 mA output, liquid in liquid out. The low cost liquid in liquid out design is ideal for liquid level applications in wastewater treatment plants, process control systems, municipal resource recovery facilities, boiler feed systems, chemical manufacturing facilities and water treatment plants.

The P499ACP-107 -K pressure transducer is a 0-750 psi pressure transducer with an adjustable output signal, null alarm, remote alarm trip, and dry contact. It can be used for various applications in heating/cooling systems, process control, engine controls, fluid power, DCS systems and other industrial automation equipment.

This is a Johnson Controls P499ACP-107 Pressure Transducer with banana jacks. It can provide with signals from 0 to 750 psi, with a span of 10 psi. This product was made in the United States and meets the requirements for CE marking.

Pressure transducer. Quick disconnect for easy, tool-less mounting. Debris screen.

Pressure transducers are designed for measuring pressure in a variety of applications including automotive, HVAC, scientific research and oil fields. This digital transducer provides a 4 to 20 mA output that can be directly interfaced with a PLC or PID controller. It is offered with a calibration certificate traceable to NIST at no additional charge.

Pressure transducers are used in applications where you need to monitor fluid pressure, or convert it to an electrical voltage.

QUICK DISCONNECT LP HOSE

The JCI P499 series Transducers are general purpose pressure sensors designed to monitor leakage or pressure drop in fluid systems. This transducer is ideal for use in hydraulic, oil, water , steam, air and vacuum applications especially in drum level monitoring. The housing is constructed of Noryl BKM material, rated UL94V-0 flame retardant to minimize gaseous chemical attack. A stainless steel thermowell allows measurement of process fluid at elevated temperatures up to 300°F (149°C).

The Johnson Controls P499ACP-107 - K pressure transmitter is used to convert pressure in H2O (water) into an process signal by using an electrically conductive method. The signal can be transmitted wirelessly, or wired through an electrical device or system.

The P-499ACP (P499) is a 4 to 20 mA, NEMA 1 or IP65 enclosure, compensator providing pressure measurement for water treatment, stack gas pressure regulators and controls, material handling systems, and level control. It can be used to compensate system flow, measure pressure to compare to set-point (remote compensators), and/or detect high/low condition (RSSI function). The compensator includes barometric compensator, fully compensated output voltage signal adjusted for application line pressure loss. Available in NEMA 1 or IP65 enclosure.

The Pressure Sensor is a lightweight isolated sensor designed to measure and convert processes' fluid pressure to a voltage for a proportional output. The Sensor converts the full-scale pressure into a proportional output from 0V to 10V, or from 4-20mA that can easily be interfaced with most process control systems. The nominal output signal can be set with a potentiometer on the front of the unit.