Johnson Controls P66BAB-1 208/480 VAC 2 POLE

"DUAL #

Dual power 347.0 Amp, 60 Hz. 208/480 VAC 2 Pole - Quad-Stack EnergySaver® Energy Manager System 0.8'' thick insulation board for freeze resistance Double insulated metal case with a gray baked paint finish

This is a WHITE SURFACE MOUNT POWER PACK with SWITCH. This power pack is available in

# #

With the P66BAB-1 208/480 VAC 2 POLE power relay, you can integrate control of two separate 208/480vac circuits. This DIN Standard relay performs its switching function within 5ms of closing the main contacts. This switching time enables fast response to your input signal. The spdt relay has many safety features built in including Positive pressure auto-reset trip units that protect against forced or accidental restarting.(89)

The P66BAB-1 is a 2 pole 208/480 VAC plug-in starter that provides the basic functions to start and run rooftop air conditioning units. It has 1 NEMA 5-15R receptacle for plug-in adaptor, 1 NC Relay trip to start fan motor in cooling mode, 1 NO Relay trip to start compressor in heating mode, 1 NC Relay trip alarm contact input, 2 dry contacts to alarm, 1 "HOT" lead (ground), 1 "COM" lead (ground)

The P66BAB-1 is a 2 Pole, Double Throw, Single Phase AC Relay rated 1 amp at 208/480VAC 1-phase. The 'B' designates the current rating up to 6 amps.

We offer a broad portfolio of motor starters, contactors, relays, capacitors, power distribution units/ panels, inverters and drives that are innovatively designed to effectively control power distribution for residential, commercial and industrial applications.

The Johnson Controls P66BAB-1 208/480 VAC 2 POLE Combination Starter & Generator Control provides load disconnect in case of an open circuit in the generator field windings, and load connect in case of an open circuit in the generator tank windings. It has an output trip current of 24 A at 208/240 VAC, and can handle up to 480 VAC. The starter & generator control consists of two separate circuits which are electrically connected. The main high voltage disconnect (HVD) function is accomplished via line switches that close when the tank circuit voltage falls below 200 VAS (180

The P66BAB-1 is a powerful solid state transformer with a full range of control and monitoring options. This compact and lightweight 208V/480V, 2 pole unit features an NEMA 3R enclosure and Class H insulation.

The P66BAB-1 208/480 VAC 2 POLE non-programmable temperature controller offers a broad range of capabilities in a variety of applications, including temperature control for heating or cooling systems, temperature warning systems to alert an operator to temperature transients, and temperature maintenance for building comfort. The P66BAB-1 is a one-piece unit that mounts directly to a mounting plate which is typically installed in the supply plenum of a furnace.

The Johnson Controls P66BAB Series Electric Locking Power Exchangers have a compact design and provide a flexible control strategy for a wide range of Configurations. The product line includes over 20 sizes ranging from 35 to 240 Amps, 5 to 480 Volt, with up to two stages of heating or cooling.

The Johnson Controls P66BAB-1 208/480 VAC 2 POLE circuit breaker is designed for use in use in industrial, commercial, and residential branch panels. These breakers should never be installed without the associated grounding device (ground wire).