Johnson Controls S350PQ-1 PropTemStageModule0-30F OFFSET

PropTemStageModule0-30F OFFSET

The PropTemStageModule0-30F OFFSET is a Johnson Controls part number S350PQ-1.

The S350PQ-1 PropTemStageModule0-30F OFFSET is a PropaneTubing and piping system and controls with a Data Management System that provides temperature monitoring, staging, and reporting to comply with ASME Section VIII Division 1 or 2. Made in US.

Johnson Controls' S350PQ-1 PropTemStage Module is a NEMA 1 enclosure that allows for timed, precise temperature control of refrigerated or frozen storage equipment within the enclosure. The S350PQ-1 is capable of reading temperatures in excess of 0°F to 500°F with ±0.2°F accuracy.

Johnson Controls® S350PQ-1 PropTemp® Stage Modules are designed for use with the Johnson Controls® S350PQ gas, oil, and dual fuel furnace.

The Johnson Controls Propane Tank Appliance Module is a module that delivers propane gas to a gas-fired appliance through a single outlet. This module can provide a steady floating ambient pressure or up to a 10 psig spike. It is UL listed for safety and comes with on/off override switch, flame failure safety device and has line pressure gauges on the front.

The compact, 50 W PCF series is specifically designed to increase the efficiency of air compressors in multi-stage systems up to 25 HP. It controls the output pressure of the compressor in relation to that of its low pressure side by varying the volume of refrigerant in its metering device. The PCF controls L10-L30 stage modulating applications and may also be used as a two-position switch where no modulating action is required. The PQ controls S350PCF series regulators.

Johnson Controls' SensorBar Plus I/O terminal offers the only all-in-one sensor that includes true 4-20mA output, open/close probe, and thermocouple wire for convenience. The long-life line output makes the module ideal for applications requiring extended readings between servicing. It can be configured to switch directly to the transmitter or to the controller, depending on how it is configuration.

Monitor your process temperature within tight tolerances. The module features accurate temperature control which is important to ensuring consistent output when part of a production line. NEMA 4 (IP65/67) Stainless Steel enclosure protects the thermocouple when in bulk storage bins, outside or when in non-sealed piping.

Propane Autogas Meter

My Custom Propane System consists of 4 components:

The S350PQ-1 series is designed for indoor use in industrial settings. Operating temperature range is -40°C to +70°C (-40°F to +158°F). The S350PQ-1 series contains four linear or switch mode power supplies with adjustable output voltages. Use this model in applications where the need for variable output voltage exists.

A reliable temperature controller must be used whenever there is a possibility that the temperature of the product may vary significantly from the temperature of the process fluid. The need to control temperature variation arises when products cannot stand high temperatures, low temperatures, or temperatures that change rapidly. In other cases, it may be advantageous to maintain a constant temperature in order to delay chemical reactions or to minimize microbial growth detrimental to products or processes.