Johnson Controls T-3610-1003 18 in. (46 cm) Rigid Stem Element with Duct Mounting Bracket

T-STAT F/DUCT INSER

This T-STAT F/DUCT INSER is a panelboard mounted, zero deadband, rotary knob pressure controller. The T-Stat Stepper Control offers a wide variety of Stepper Control features. A unique feature of the T-Stat is its fully insulated, pressure balanced yoke with built in manual zero and single point calibration adjustment.

This T361003 18 inch (46 cm) rigid stem element is made for F and Duct applications and is perfect for heating and air conditioning systems that require both space and flexibility. The flex duct mounting bracket helps you install this product easily and ensures its durability.

Precise climate control in any weather conditions. The T-STAT FT-100 offers reliable temperature control from -10 to 140 degrees F (-26 to 60 degrees C) and can work with both natural gas and propane. These units are also great for use in the construction industry or by dealerships that require specific temperatures to be maintained. To get your pre-cooling going, the T-STAT FT-100 Series has a field adjustable thermostat. For easy, flexible installation, this thermostat is able to be mounted either front or rear side of the HVAC unit.

This T-STAT rigid stem and mounting bracket assembly features a Johnson Control's packaged terminal air conditioner control. It is designed for use with ducted systems and includes the terminal box and logic processor, as well as a copper tube assembly for tapping into a system at any desired point. This unit is an ideal choice as a replacement for older controls already installed in many buildings or as part of new construction where building owners or operators want to control climate using their own energy management systems.

With a T-STAT® in your system, you can monitor and control each room independently, for up to four zones in four separate locations. Plus, T-STAT®s have a one-year warranty, giving you peace of mind in case anything goes wrong.

This Johnson Controls 18 in. (46 cm) Rigid Stem Element with Duct Mounting Bracket has an adjustable T-Stat mounting plate, making it ideal for horizontal or vertical duct applications. The unit is easily installed with quick connect wiring. It is made of galvanized steel and has a convenient wall mount bracket for quick and easy storage.

The T-3610-1003 is a 18 inch (46 cm) single zone electronic air flow controller with a mounting bracket. The mounting bracket is completely adjustable around the duct it is attached to. This element has a screen located on the bottom of the element enclosure to allow for outside air to pass through and fill the element enclosure. The controller turns on and off in response to the temperature sensed by the sensors inside the element enclosure.

If you could measure and actively control all the factors in the area around a heating and cooling system, you'd be able to maintain comfort and efficiency longer. With T-Stat technology, we can do just that.

This heat only control valve with 1/2 in. NPT connections has a minimum differential pressure rating of 50 Pa (-0.0065" W.C.) between the actuator port and the atmospheric side port, 300 sampling hours for air conditioning, two positions - full heating or full cooling, 12 deg F differential limit

Import substitution reduces costs and increases flexibility in building design because rigid stem room thermostats are easily adapted to duct-borne systems.

Precision Designed Automotive HVAC controls for all Auto, RV and Marine Applications. The Evolution(TM) Series controls offer robust HVAC performance with demanding protection and the longest life cycle of any automotive HVAC control. JCI applies decades of experience, high-quality components and rigorous testing to provide dependable solutions for your vehicles heating, ventilation and air conditioning (HVAC) needs.

Mobile air mixing fixtures simplify the measuring of air pollution, enable real-time controls for exhaust systems and help to protect people and property from bypass events.