Johnson Controls T-4000-611 CONV.KIT FROM 400 SERIES 2PIPE

CONV.KIT FROM 400 SERIES 2PIPE

Johnson Controls T-4000-611 CONV.KIT FROM 400 SERIES 2PIPE in Gas Packages

The Johnson Controls T-4000-611 CONV.KIT FROM 400 SERIES 2PIPE converted burner is designed to work with the Johnson Controls T400 Series 2-pipe gas boilers. The kit uses four 5/8" burners which are included in the conversion. This kit includes a BTU rating of 63,000. All hex nuts and bolts used with the kit are supplied along with detailed installation instructions. The conversion can be installed by an authorized distributor or dealer.

The T-4000-611 Conversion Kit creates a flexible HVAC solution for your 400 Series 2pipe steam unit. It's able to convert your 400 Series 2pipe steam unit from steam, to hot water, to cooling. This kit comes fully featured with controls, valves, and more.

The T4000-611 Conversion Kit for 400 Series 2-pipe Heat Pumps helps you save energy by converting your existing 400 Series 2-pipe system to electrical power. The kit features a 5 HP, 208/230 Volt, 2410 RPM motor that is operating at 3.70 A to allow for quiet performance that exceeds the current AFUE standards. Includes the indoor & outdoor sections plus conversion wiring harness & plugs which are all weather resistant.

The T-4000-611 Conversion Kit for Johnson Controls 400-Series 2Pipe provides a field-convertable solution for converting a System 400 Preheat venting system into a System 200 Preheat venting system. It consists of a Johnson Controls T-4000 preheat coil and a 2 in. to 1 in. reducer adapter. This kit is intended for installation on unit heater or unit ventilator equipment manufactured from January 2008 through February 2009.

This kit will convert your 400 series two-pipe unit to a single pipe unit so as to allow installation of the Johnson Controls T-36C wired controller. It includes one conversion plate and wiring harness for use on Johnson Controls conventional commercial ventilation systems up to 12 grille and 12 plenum filter combinations.

A 400 series Conversion Kit is a controller for use in conjunction with the existing Transmitter to control an additional pump. By adding a module, remote switch, and auxiliary switches to this conversion kit, you can expand your PumpMaster Pump system.

The T-4000-611 Conversion Kit from Johnson Controls is able to replace an existing boiler after the old one has been drained. The kit is high quality and will provide reliable service wherever it's needed.

A 12 x 12 40W MICRO HEATER that is 25ft long. This unit contains a replaceable thermostatic valve with ¼" pipe thread connections on both inlets and outlets.

The air-cooled, positive pressure T-4000 family is designed to meet today's HVAC/R replacement market demands. The T-4000 Series offers a powerful combination of standard features and impressive value for contractors, homeowners and rental owners.

Johnson Controls commercial heating and air conditioning systems offer an unbeatable combination of energy efficiency, operating performance, and durability. Whether you're looking to upgrade your HVAC system to save money and energy or maintain a reliable HVAC operation, we have solutions that meet your needs and budget.