"50/150F 5.5""CAP TempXMTR "
The Johnson Controls T5210-1008 TempXMTR Copper Bulb with 5 1/2"" Copper Capillary and 50 to 150°F Range, measured at bulb surface and is etched on capillary. The capillary range provides approximately 15 degrees of tolerance for the copper capillaries to compensate for variations in copper conductivity across the production range.
The T-5210-1008 temperature transmitter with 5.5"" capillary combines the advantages of an insulated copper thermowell with an optical temperature sensor to measure process temperatures in many process environments. It is used for temperature measurement of water, steam, air, natural gas and other liquids (with low conductivity).
The 5.5"" Copper Capillary Thermostatic Temperature Sensors feature thermally coupled shrouds that provide accuracy over the entire length of the probe. The probes are available with either tin or copper capillaries and are rated up to 200°C (392°F) continuous service temperature.
The Eclipse Series Temperature Transmitter is ideal for plant control applications that require remote temperature measurement. It's housed in a miniature cast-aluminum enclosure with 6 ft cable for connection to transmitter output circuit. The T5210-1008 specifies a range of 50°F to 150°F with an accuracy of ±0.5°F from 50 to 125°F, and ±1.0°F between 125 and 150°F.
Bulb with Copper Capillary for Johnson T5210-1008 Temperature Transmitter . Equivalent to Honeywell TH7500/5050.
Set-screw version, standard lens, 2"" dia., for use on DA30/40/50/5O/07/10 lamps. Use of specified interstitial capillary is recommended
F150-Capillary bulb is a new generation of thermometric element. It allows measurement up to 150°F without any sensor modifications, and is the ideal solution for temperature measurements in mixtures of liquids and/or gases. The copper capillary gives the thermometry circuit the capability to determine complex temperature properties such as partial pressures or activity coefficient ratios.
The most popular range of capillary bulb thermometers for process engineering and laboratory applications. The rugged construction and general purpose design make this model suitable for most applications.
The Johnson Controls T-5210-1008 temperature probe mounts on the copper capillary of a temperature bulb for temperature indication on steam vent, hot water return, or similar piping systems. For use with Johnson Controls Standard Type Temperature Probes.
What is the product' What does it do? The T-5210-1008 bulb is a (p) (i) (d) (q) (r) (e) 1/2 Bulb replacement for use in electronic thermostats. This bulb has a color of red. The dimensions are 6 3/4" High by 1 1/2 " Wide
This fully integrated air-circulation transmitter converts energy into airflow that is transmitted to the ICP using superheated steam. This transmitter, made specifically for the ICP, offers better accuracy and repeatability than other types of transmitters due to its constant-temperature calibration."
A compact, complete bulb-and-capillary assembly that is used in a wide range of temperatures to measure the performance or integrity of refrigerant equipment.