ASCO 68673 Aluminum Body Medium Pressure Direct Acting Fuel Gas Shutoff Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1.25" Orifice, 20 Cv Flow, 120V/60 Hz, 110V/50 Hz

120V 1-1/2" 2-WAY N.C. SAFETY SHUTO

ASCO 68673 Aluminum Body Medium Pressure Direct Acting Fuel Gas Shutoff Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1.25" Orifice, 20 Cv Flow, 120V/60 Hz, 110V/50 Hz

The ASCO 68673 is a UL listed, 2-way normally closed actuator operated fuel gas shutoff valve. The valve is for use with natural or propane gases and features a cast aluminum body with riveted steel lever that provides easy operation and long term reliability. The actuator allows complete throttling within the flow range of 0-3 GPM at 6 GPH to 100 PSI. An ANSI flange connection fits 1-1/2" EMT or IPS pipe size, while a 1.25" diameter bore with a 0.50" throw valve seat provide excellent flow capacity.

Designed to prevent unwanted gas flow in fuel systems this ASCO Safety Shutoff Valve is a direct-acting, full port 2-way valve made of strong aluminum. It consists of a machined solid aluminum body, with a 1-1/2" BSPT top connection and a half-round flanged bottom connection. It is used in residential and commercial applications and meets gas code and building code requirements of most countries.

The ASCO 68673 Aluminum Body Medium Pressure Direct Acting Fuel Gas Shutoff Valve features a 1-1/2" pipe size and includes an aluminum body with a 2-way normally closed duty, nitrile butylene seal, 1.25 orifice, 20 cv flow, and 120V/60 Hz or 110V/50 Hz power consumption. The valve body construction is brass while the handle is anodized aluminum. The valves control the flow of liquid or gas from one point to another for your residential and industrial applications.

The ASCO 68673 aluminum body Medium pressure direct acting safety valve is recommended for natural gas applications in the United States, Canada, Mexico, and Guatemala. It comes with a 2-way normally closed configuration and a 1-1/2" pipe size. It has an orifice diameter of 1.25". This valve has a maximum flow rate of 20 CV at a differential pressure of 120 psi. Recommended operating temperatures are between -104 to 122 degrees F.

Medium pressure direct-acting pressure reducing valve is designed to be connected to 120V. Maximum flow is 110 GPM at a maximum differential of 14 psi; minimum differential is 2 psi. The 2-way shutoff valve has a 3/4" NPT inlet and outlet port.

Designed to fail-safe upon failure of any or all of the gaskets, N.C. valves are identified by operating handle position: handle must be in the full "open" position for gas to flow from the supply line into the appliance and fully closed for gas to flow form the appliance to the outlet. The 2-position handle is marked N.C. for normally closed and C.O. (for common open) for normally open.