Honeywell 110225 L6081A1036 HI/LOW Limit HI-10fFix Lo-AdJ HI/LOW Limit HI-10fFix Lo-AdJ

High and Low limit Aquastat Control

The L6081A-1036 is a 1/8" Traveler control featuring an Aquastat, adjustable High Limit with 10ft. probe, and Low Limit with Ground Fault Circuit Interrupter. The durable case is designed to be mounted in the furnace plenum or return air duct using the provided tabs for simple installation.

This is an adjustable limit aquastat designed to fit any 2-stage gas or oil fired unit heat pump system operating on either high or low stage. The control is setting and should be manually set to the proper position, before being placed in the circuit. The assembled control also has a built-in thermal protection device which protects the control against the possibility of overheating due to improper wiring. When it reaches temperature, it trips out (opens). If this occurs, turn off controls and allow them to cool down before use. HONEYWELL Part Number: L6081A1036

The Aquastat L6081A1036T Pressure Switch is a direct replacement for the 10F/10F HE Generac. It has a high limit of 165 PSI and a low limit of 0 PSI. This switch fits the Generac pumps with suffixes ending in -1, -2, -3, or -4 for the following applications:

All Aquastat controls are factory wired to the heating element. The pilot light circuit is wired in series with the heating elements. This provides a low current, smooth turn on for the pilot light but this configuration requires considerable power to operate the control and heating element simultaneously.

This Honeywell Aquastat control replaces the existing control on a variety of heaters. It is a compact, solid state, plastic case, direct replacement for the following models:

The 6081A Aquastat control incorporates state-of-the-art microelectronic technology to provide maximum accuracy at the lowest cost. The fully sealed electronic unit operates on 12 volts dc and can sense a 1/3% change in temperature and a 2% change in moisture. Strain relief connectors are included on the 4-wire leads to safeguard against wire pullout.

The Honeywell L600 IAQ Series offers a full line of zero-clearance, high efficiency, low profile fan-powered humidifiers in a variety of sizes. The Aquastat® II control selectively energizes the compressor only when needed to maintain the preset humidity level set on the unit