Lennox 14A44 Pressure Switch 2-STG-.60/-.35

Pressure Switch 2-STG-.60/-.35

The Lennox 14A44 Pressure Switch 2-STG-.60/-.35 is a pressure-activated switch that shuts off the burner if a drop in, or loss of, system pressure occurs.

Model 14A44 Pressure Switch 2-STG-.60/-.35

The Lennox 14A44 pressure switch 2-STG-.60/-.35 has been designed with efficiency in mind and includes an adjustable humidistat. This helps to provide you with warm, comfortable air in the wintertime. You will also find that this unit is both easy to install and easy to use, with all of its functions incorporated into one place. Note: This unit requires at least 2000 cfm of free air volume at its location for proper operation.

The Pressure Switch allows you to easily convert a single stage thermostat to a two stage thermostat. There are two designations on this Pressure Switch, the .60 and .35. These tell you how many stages are available in the system that it is being used with. For example, if a two stage heat pump system has a .60 on the label, you will know it is ready for a 2-STG-.60/-.35 Pressure Switch. If the same system has a .35 on the label then you will know that it needs a 1-STG-.60/-.35 Pressure Switch

The 2-STG-60/-35 Pressure Switch is a single stage gas pressure switch used for venting direct vented furnaces, packaged boilers, and gas or oil-fired water heaters.

Designed for use with 2-stage heat pump systems, the Lennox 14A44 2-Stage Pressure Switch is certified to work with gas furnace 14A44, and can be used in both single stage and 2 stage unit. The switch is designed for multi-position application and should be installed when a limit control is required.

This part is a pressure switch that can handle a maximum of 3400 watts and 64 amps. It is potted in a thermoplastic material. The pressure switch is light in weight and contains thermoplastic.