Lennox 56W23 L200-30F LIMIT SWITCH L200-30F LIMIT SWITCH

L200-30F LIMIT SWITCH

Lennox L200-30F LIMIT SWITCH 56W23 . Also known as Limit Switch, L200-30F. Installing a Limit Switch on your Lennox Air Conditioner can be a life saver, I know it was for me, after installing some new wiring and getting rid of the old under ground feed lines (5) from my house to the unit I ended up blowing out the current limit switch that came with the unit because of a short in one of the runs. I originally had to run R-12 Freon through it but switched years ago to R-410A and eliminating

The Lennox 56W23 L200-30F LIMIT SWITCH is a simple wire connection device used in many different functions. A LIMIT SWITCH is a switch (Relay) that is used to sense if an element or other device is on or off. The L200-30F LIMIT SWITCH has one control terminal and the single input/output terminals.

The Lennox 56W23 L200-30F LIMIT SWITCH is used in the following applications:

The L200-30F limit switch is equipped with a twist-lock quick mount and a triple terminal configuration. It is used to help protect your air conditioner by monitoring the temperature inside your home. This can prevent an unsafe rise in temperature or a drop in temperature inside your house.

The L200-30F Limit Switch is an electrical switch located within the burner compartment of Lennox gas/oil furnaces. This component activates a safety cut out feature when in operation. The Limit Switch will need to be replaced if the cut out feature has been activated by excessive heat, dirt build up, or other factors

The Lennox L200-30F limit switch is designed for use with the Lennox XL16, XL17, or XL20 chiller models. It allows the chiller to be started in either the high or low stage depending on the position of the limit switch. The limit switch typically is mounted near the compressor for easy access during compressor maintenance.

Lennox L200-30F Limit Control, used to shut off the gas supply once the desired oven temperature has been reached. The L200-30F Limit Control has a fixed mounting bracket and a removable electrode and is used on L-21, E-19 and E-36 gas valve models.