BELIMO LMB24-SR LMB24-SR US 24 NON-SPRING RETURN ACTUATOR 45

US 24 NON-SPRING RETURN ACTUATOR 45

BELIMO LMB24-SR/ US 24 NON-SPRING RETURN ACTUATOR 45

This UN 24 non-spring return actuator, part of the BELIMO LMB24 (Lifting Manhole Block) family, is equipped with safety features such as a double locking system and red signal lantern. UL listed to ASME A17. 1 for use in power plants, including concrete encasement service A18. 2 for use in high and low elevations service A22. 3 for general purpose piping service

The LMB 24 non-spring return actuator is used for limited space applications where initial travel and retraction force can be adjusted. The unit is ideal for use between two opposite pairs of doors in a commercial application, especially in situations where energy costs are an issue.

The BELIMO LMB24-SR non-spring return actuator is a direct equivalent to the original 24 VDC gate motor used on most of the BELIMO/ZA and BELIMO/ZB models. The 24 non spring return actuator comes with a screw-on terminal box and 1m of cable. The picture is for reference only.

The Belimo LMB 24-SR non-spring return actuator is a free-falling solution. This Belimo actuator offers a long line of sight and is conformable to most pipe configurations. It comes in a variety of end connections including MH20, MH25, and MH27. ##

The LMB24-SR is a 24-Volt DC non-spring return actuator with an operating range of 0 to 850°F. The actuator is constructed from a solid aluminum body which tops and bottom are sealed with a rubber gasket. It is protected by a glass filled thermoplastic for chemical resistance and high heat conditions. The magnetic latching circuit is designed to work in conjunction with all types of mechanical limit switches.

Belimo LMB 24-SR is a NON-spring return actuator designed to provide accurate and reliable control over lift level. The LMB24 SR is compliant to the following: NEMA TS1, ASME SA156 B14.3, EN 131, AS 3112, EN 12647, IEC 60439-5. Features include: Control of Mode 4 in accordance with EN 12594 regulations and Australian code compliance for Type 45 valves Control of Lift Level through various other control