Honeywell 10711 24V NON-SPRING RETURN DIRECT MOUNT

24V NON-SPRING RETURN DIRECT MOUNT

24V NON-SPRING RETURN DIRECT MOUNT

The 10711 24V NON-SPRING RETURN DIRECT MOUNT, with the OMNIBLOCK mounting system, offers a customizable solution for flush mounted applications. With durable steel construction and easy installation, the Direct Mount provides reliable performance and dependable flexibility. Spend more time enjoying your central AC unit rather than maintaining it.

Plug-in non-spring return direct mount smoke detector; continuous or intermittent alarm signals; radiated sound power levels, in air, at 3 ft. (91.44 cm) of 74.8/121 dB at 10 Hz to 500 kHz and 84.2/124 dB at 500 MHz to 40 GHz; UL approved One Honeywell 24V non-spring return direct mount smoke detector with built-in cliplock multipurpose mounting base and wall anchors

With a Honeywell Non-Spring Return Direct Mount 24V Control, you can save energy and money by combining two functions (limit switch and startup) into one convenient mounting location. Nothing is easier to wire than direct mount controls with no springs or micro switches to adjust and connect.

The 10711 direct mount thermostat is a one-touch, non-spring return direct mount thermostat. This 24 VAC/Voltage thermostat is for use with 24 Volt heating and cooling systems that require a 24 VAC thermostat. This is a standard replacement item for existing Honeywell/White Rodgers direct mount controls.

These switches are direct mount non-spring return. This thermostat features a single pole switch with four wires, a common return and a terminal for auxiliary heat. It has no binding screw adjustment only setscrew adjustment. There is no beeper on this thermostat.

Mount this 24V DIN Direct mount. Variety of motors available: VPH (variable position hi-speed), VPH & VFD (variable position hi-speed and variable frequency), VPH, VP2, VRI (variable speed) and VRE (variable speed and electronic brake).