24V MODULATING NON-SPRING RETURN DIRECT COUPLED AC
Whether you're looking for 24V, 120V or 230V MODULATING NON-SPRING RETURN DIRECT COUPLED AC, Honeywell has what you're looking for. Find out more details at our product page at http://www.colonielightinganddakroutdoorsupplies.com/4100-actuators-24v.html
MODULATING Non-spring return direct coupled actuators have a wider torque range than do spring return lead-wire types, without the complexity of mechanical stops. This 24Vac, 1/2 H.P., 115/1/60, 3 wire base miniature non-spring return direct coupled actuator is suitable for both DC and AC operation. Meets NEMA MG1 Type A, Class C and IP65 specifications. Operating temperature range from -5 to 140 degrees F. Maximum piston speed from 0.75 to approximately 19 inches per second at 24 VDC with a load torquing against the sealed coil
The 10736 4–3/4" Depth Actuator, 175 lb. Non-spring Return, -5 Degree to 140 degree F Temperature Range, is a 24V DC modulating actuator designed for use with process valves as a pilot duty cycle actuating device.
The Honeywell 27MM direct coupled/non-spring return actuator is a premium 24vdc non-sprin return actuator with a heavy load, non-spring return feature.
This product is exclusively designed for Honeywell direct coupled non-spring return actuators. It has an adjustable input voltage, mounting type, and temperature range of -5° to 140° Fahrenheit. This product is offered as a 24Vac actuator with a 175-pound capacity (and 1000-cycle life).
This non-spring return actuator features a 24VAC to 12VDC voltage converter, and is designed with a 16/32 inputs to outputs ratio. It can be used on any switch with 24V, 5A or less. Additionally, the actuator converts and regulates the signal from 0-12VDC ensuring that the output switch works as expected. It will work for both normally open and normally closed switches, including fan coils.
The 10736 is a 24 VAC, non-spring return, continuous duty actuator.