JOHNSON CONTROLS P70LB-6C P70LB-6C SPDT DUAL PRESSURE CONTROL LS 12 /8

SPDT DUAL PRESSURE CONTROL LS 12 /8

On/Off control, 4-20 mA output, 4-20 mA input, 4 to 20 mA range

The Johnson Controls P70LB-6C P70LB-6C SPDT DUAL PRESSURE CONTROL LS 12 /8 is a low voltage, 0 - 10 VDC, double pole dual throw dual pressure switch. It has a rated current of 6 Amps and a maximum switching current of 8 Amps @ 28VDC. It is suitable for use in power supply and control circuits.

When precise pressure control is a must, the Johnson Controls P70LB-6C dual pressure control switch is the answer. This SPDT microswitch pressure control switch features a -6 to +12.5 VDC voltage operating range and is rated for .25 amps maximum continuous current. The P70LB-6C SPDT dual pressure control switch features a carbon brush rated, double pole, double throw (SPDT) design with 2 independent sets of actuators and an electric coil resistance of 120 ohms and a manual actuating force of 1 lb.

SPDT DUAL PRESSURE CONTROL LS 12 /8

JOHNSON CONTROLS P70LB-6C P70LB-6C SPDT DUAL PRESSURE CONTROL LS 12 /8 is a Pressure Switch that has a Pressure range of 0.2 - 2.0 lb, Pressure setpoint of 0.2 - 2.0 lb and a Voltage of 240 Vac or 120 Vac with an electrical Connection and a Lead Length of 1".

A pressure-operated switch that changes state when pressure is applied. It contains two miniature switches in one compact housing and is available with a range of different actuations and configurations. The P70LB-6C is a SPDT dual pressure control switch, which means that there are two switches contained within the one switch housing. When the actuator is pressed down (i.e., under pressure), the top switch will activate, turning on the load. When the actuator is released, it will activate the lower switch, which will turn off the load.

Johnson Controls P70LB-6C P70LB-6C SPDT DUAL PRESSURE CONTROL LS 12 /8

The JOHNSON CONTROLS P70LB-6C P70LB-6C SPDT DUAL PRESSURE CONTROL LS 12 /8 is a great selection and is available now!

This is Johnson Controls, Inc. P70LB-6C P70LB-6C SPDT DUAL PRESSURE CONTROL LS 12 /8. The MTN / PRN setting provides a 0 psig output when the pressure switch is connected to negative and positive, and 10 psig when the pressure switch is connected to negative only. The MAX setting provides a 0 psig output when the pressure switch is connected to positive only, and 10 psig output when the pressure switch is connected to negative and positive.

The Johnson Controls P70LB-6C is a solid state pressure control switch with normally closed (NC) contacts. The P70LB-6C provides dual pressure control in a single manifold and is designed for use on fuel fired heating and hot water systems in which the system pressure can be regulated by the addition of oxygen.