HONEYWELL Q624A1014 Q624A1014 120V SOLID STATE SPARK GENERATOR RE

120V SOLID STATE SPARK GENERATOR RE

Remove all worry about changing your system voltage when you're traveling - this generator will automatically adjust to anywhere in the world. 120V Solid State Spark Generator System has been designed to operate on any voltage from 100 to 240 VAC, 50/60 HZ inputs. Combining the features of the WX-2000 with the power and energy saving of a solid state generator, this model is an excellent choice for an OEM application, panel board or remote location.

The Honeywell Q624A1014 solid state spark generator replacement is a 120V replacement for a variety of electronic ignition products. It runs on 120 volts, operates at 60 Hertz, and has been tested to UL 498 and CSA C22.2 No 95 standards. This spark generator features an aluminium case with a steel base that reviewers note is “robust” in comparison to other models they’ve used in the past

Small in size, big on power! For spark generator requirements within the 2-175 kW range. This solid state spark generator is small in size with a very compact plug-in connector for easy installation in small spaces and safe to use around flammable gases and vapors. The unit's design incorporates many safety features including an over current disconnect with battery protection, an interlock for mounting to a non-conducting surface while energized, a ground fault interrupter to prevent electric shock,

The Q624A1014 solid state spark generator is simple to install and includes a visual malfunction indicator lamp. Applications include commercial, retail and industrial settings that require constant operation, such as department stores, hotels, etc...

This solid state spark generator provides high quality, repeatable results and is ideal for testing a variety of different circuit protection devices at 120V.

This Spark Generator has one operating voltage: 120 VAC. The compact size, solid state design and integrated choke output make it a good choice for applications such as ignition of gas turbine systems, diesel engines and auxiliary power units.

The Q624A1014 spark generator is a solid state spark source used for ignition, flame stabilization or for research and development needs. The unit produces 24V at 0.1A adjustable to 1 amp with an output from approximately 3/8 inch up to 3/4 inch long. This unit is low impedance and high flame rate making it ideal for use with small propane burners. It can be used with liquid or gaseous hydrocarbon fuels including: propane, ethylene